Tag: private label

Private Label Self-Tanner Manufacturing: What to Know
A private label self-tanner is a sunless tanning product
— usually a mousse, gradual lotion, or face drops — made with the color additive
DHA and sold under your own brand. A custom formulation built to your brief starts at 1,000
units; a white label version from an existing formula starts at 200. The first real decision
is how much you need to change the formula, because that choice sets your minimum order, your
lead time, and how much of the regulatory work is yours. The second is the label: a tanner
without sunscreen carries a mandatory FDA warning, and adding SPF turns the product into an
over-the-counter drug with a different set of rules. Moe’s Group makes DHA self-tanners in
California from those minimums, and is the wrong fit for sub-200-unit tests, spray-booth
solutions, or anything with SPF.

“Private label self-tanner” is a low-volume search, but it is a specific one — the
people typing it are brand founders planning a summer launch in the winter, and they want to
know what they are signing up for before they call a factory. This guide covers what a
self-tanner actually is and how DHA develops a tan, which format to order, what US label rules
require, and — because the site behind this piece names where its backer is the wrong
choice — who makes private label self-tanners, including the cases where Moe’s Group is
not the right first call.

What is a private label self-tanner, and how does DHA work?

A self-tanner creates color without the sun. The active is almost always
dihydroxyacetone (DHA), a sugar that reacts with amino acids in the outermost
layer of dead skin cells to produce brown pigments — the same Maillard-type browning you
see when food is cooked. The color is temporary because it sits in cells that naturally slough
off: in the published literature the tan typically begins within about an hour, deepens over the
next 8 to 24 hours, and fades over roughly 5 to 7 days
(FDA, Sunless Tanners & Bronzers; Braunberger et al., J Drugs
Dermatol, 2018). Marketed products commonly use DHA in the 3–5% range, with higher
percentages giving a deeper, faster color and a higher risk of an orange or uneven result.

The regulatory status matters before any marketing does. DHA is a color additive
listed for externally applied cosmetics at
21 CFR 73.2150 and is exempt from batch certification — it is a listed
color additive, not a drug active, because drug-style approval does not exist for a cosmetic. “Externally
applied” is a legal limit, not a figure of speech: DHA is not cleared for use in the area of the
eye, on the lips, or on any surface covered by mucous membrane. A manufacturer that describes DHA in those
terms — a listed cosmetic color additive — is a better sign than one that calls it a
drug the agency has cleared, which is the single most common way to get the regulation wrong.

White label

A ready-made, existing self-tanner formula (also called ready-to-go) that you relabel under
your own brand. Nothing new is developed, so it is the lower-commitment route — 200 units
at Moe’s Group, with nothing below that — and reaches a first batch without a formulation
phase. The same stock formula can be sold by other brands.

Private label

A custom self-tanner formulation developed to your brief: your DHA percentage, format, scent and
finish. A chemist formulates and stability-tests it before it exists, so it is the higher
commitment — 1,000 units at Moe’s Group — and the formula is yours.

Contract manufacturing

The manufacturing service itself, which both routes sit inside. Formulation ownership, pricing and
lead time are agreed per project rather than fixed by the label on the route.

Chuffy expected a dye and got a chemistry lesson: DHA reacts with the dead outer skin to make color, so it builds over a day and fades in under a week. He also learned why the one streak looked orange – too much, too fast.

Which self-tanner format should you order?

The format is not a cosmetic detail — it changes the customer, the price point and the
formulation work. Moe’s Group’s self-tanner page lists five it makes in-house, and they map onto
different buyers. A mousse is the salon-adjacent classic: fast-drying, easy to see
where it has been applied, popular for a deep one-session color. A gradual lotion
is the mass-market entry point — low DHA, built up over several applications, forgiving for
people who are nervous about streaks. Face drops let the user mix their own
intensity into a moisturizer, which is the format currently driving a lot of the category’s growth.
A gel or serum reads as premium skincare; a water-based mist is
light and layerable.

Pick the format before you pick the DHA percentage, because the two decisions are linked: a gradual
lotion and a deep-color mousse are different products with different actives levels, different claims
and different customers, even though both are “self-tanner”. If you also sell other body products, the
same factory choice applies across the range — Moe’s Group groups self-tanner with its other
private label body care
formats such as body oil, scrub and butter, which can matter if you want one manufacturer for the
whole line. What a factory should not do is treat every combination as routine: DHA can lose
effectiveness or discolor alongside certain other ingredients, including some physical sunscreens and
acids, so a formula pairing DHA with anything active needs a compatibility check, not an assumption.

Chuffy wanted to order ‘a self-tanner’ and discovered there were five of them, each for a different customer. The mousse buyer and the gradual-lotion buyer were not the same person, and the DHA level followed the format, not the other way round.

What do FDA rules require on a self-tanner label?

This is where self-tanners get stricter than most body care, so it belongs in your plan from the
start. A tanning product that does not contain sunscreen must carry a specific warning telling the user
it provides no sun protection; the exact wording is set in
21 CFR 740.19, and because the CFR text is the legal standard, it should be reproduced
as written rather than paraphrased. That single rule rules out a whole category of marketing: a
self-tanner cannot claim to protect from the sun, prevent sunburn, or carry any SPF number, because it
does none of those things.

Adding SPF does not fix that — it changes the category entirely. A tanning product with
sunscreen in it is regulated as an over-the-counter drug, not a cosmetic, which means a
different facility, a different quality system and a different approval pathway. If a sun-protective
tanner is your product, a general cosmetics manufacturer is the wrong starting point; our guide to
whether a cosmetic
manufacturer can make sunscreen explains why the OTC-drug line is the one that decides your whole
sourcing plan. Two more label points are easy to miss. Bronzers or guide colors have to use color
additives the FDA lists for that use — caramel, iron oxides and mica are listed; certified FD&C
dyes need certified batches. And erythrulose, the slower co-active sometimes paired with DHA, is not a
listed US color additive, so a US label using it needs regulatory advice first rather than being treated
as a routine pairing (per Moe’s Group’s own self-tanner page; confirm against the current eCFR before you
rely on it).

One more assumption worth checking: the MoCRA small-business exemption may not cover you. The exemption
excludes products intended to alter appearance for more than 24 hours where removal is not part of normal
use — which can describe a self-tanner — so do not assume your facility registration obligations
disappear because your business is small. Get that confirmed for your specific product.

Chuffy learned the label was half the product. No sunscreen meant a warning he had to print word for word; adding sunscreen meant a different factory entirely. The pencil note that said ‘just add SPF’ got a line through it.

Who makes private label self-tanners — and where is Moe’s Group the wrong fit?

A shortlist is only useful if it says where not to use the company behind the site. Moe’s
Group is a US, FDA-registered contract manufacturer that makes DHA self-tanners — mousse, gradual
lotion, face drops, gel or serum, and water-based mist — formulated, filled and labeled in-house in
California, from 200 units on a white label formula or 1,000 on a custom one. For several common
situations, that is the wrong tier, and a specialist is the better place to start:
- You need fewer than 200 units for a test. Moe’s floor is 200. For a small pilot,
  Blanka (Canada, ships to the US) runs a near-zero-minimum, white-label dropship model — you
  apply your label and they ship to your customer — though it is a catalog service, not custom
  formulation. AJ Cosmo Labs is a platform that connects founders to small-batch makers offering
  roughly 100–500 unit runs, with a new custom formula typically taking 8–16 weeks.
  Confirm current terms with each before relying on them.
- You want a salon airbrush or tanning-booth solution. The FDA has not approved DHA
  as an all-over spray in tanning booths, because the safety data for inhalation and eye/lip exposure
  was never submitted — its guidance is effectively “ask first”. That is a professional-equipment
  specialty; Moe’s own self-tanner page does not confirm booth or airbrush spray solutions, so do not
  assume it as a capability.
- Your product has SPF. That is OTC-drug territory and needs a facility set up for
  OTC drug manufacturing. Moe’s self-tanner scope explicitly excludes tanners with SPF, so a
  sun-protective tanner is the wrong brief to send them.
- You are prioritizing USDA Organic certification at a larger run. Medpak Solutions
  (St. Petersburg, FL) makes self-tanning lotions, drops and mousses and lists ISO 22716, GMP and USDA
  Organic, with a reported minimum of about 2,500 units (their terms, dated 2025-12-15); their terms
  also state they are not an OTC provider. If organic certification is the deciding factor and you can
  meet that minimum, they are a direct match.
- Your primary launch is in the EU. A US facility can make product for export but will
  not carry EU compliance or act as your EU Responsible Person. Tanaura Labs presents itself as an
  EU-based self-tan specialist serving multiple international markets; its minimum and pricing were not
  published at a source checkable today, so treat it as a named lead to verify, not a quoted term.
Other names you will meet are worth checking but could not be verified today: Sunless Inc. and Norvell
(both Arizona) appear on third-party roundups as tanning specialists, but their minimums and current
retail-private-label availability were not confirmed from their own sites, so ask them directly rather than
trusting a listing. Where Moe’s Group does fit is the opposite of all the cases above: you can commit
to at least 200 units of a stock formula or 1,000 of a custom one, you want a single US FDA-registered partner
that formulates, fills and labels under one roof, and your product is a cosmetic self-tanner without SPF. For a
skincare or body care brand launching a DHA self-tan line at that scale, it is a legitimate candidate —
and the honest answer to “is it right for me?” is decided by your unit count, your format and your SPF decision
before anything else. The specifics of DHA percentage, formats and label requirements live on Moe’s own
private
label self-tanner manufacturing page, which is the right next read once you know what you are ordering.

Chuffy wanted one factory for every version of his idea and found the honest answer branched. A tiny test, a booth system, an SPF product, an organic line and an EU launch each pointed somewhere else; only a committed cosmetic run pointed back at one US partner.

What should you decide before you order a private label self-tanner?

Come to the first call with four answers and the quote you get back will be real. First,
white label or custom? A ready-made formula you relabel starts lower (200 units at Moe’s
Group) and skips the development phase; a custom formulation built to your brief starts at 1,000 and the
formula is yours. Second, which format and DHA level? Mousse, gradual lotion, face drops,
gel/serum or mist — and a gradual-build lotion is a different product from a deep-color mousse, with a
different active level and a different customer. If you need a sub-200 test first, our guide to
small batch cosmetic
manufacturing covers the low-minimum routes.

Third, does it have SPF? If yes, you are commissioning an OTC drug and need a different
facility; if no, you must print the 21 CFR 740.19 no-sun-protection warning as written. Fourth, what
can you legally claim? A self-tanner can say it gives a natural-looking sunless tan, builds color
gradually, and leaves an even, fast-drying finish; it cannot say it protects from the sun, boosts or
accelerates your natural tan, firms skin, or treats any condition. If you are still weighing white label
against a custom formula, our comparison of
OEM vs. private label cosmetics lays
out the trade-off the terms hide. Decide the route, the format, the SPF question and the claims first; the
right manufacturer falls out of those four answers, and every figure here should be confirmed with the
supplier before you commit.

Frequently asked questions

What is a private label self-tanner?

A private label self-tanner is a sunless tanning product — typically a mousse, gradual lotion or face
drops — made with the color additive DHA and sold under your own brand. “Private label” means a custom
formulation developed to your brief, which at Moe’s Group starts at 1,000 units; a “white label” version uses an
existing formula you relabel and starts at 200. DHA reacts with the dead outer layer of skin to create temporary
color that builds over a day and fades in about 5 to 7 days.

What is the minimum order for a private label self-tanner?

It depends on the route and the manufacturer. At Moe’s Group a white label (ready-made) self-tanner starts at
200 units, with nothing below 200; a custom formulation starts at 1,000. Elsewhere it varies widely — Blanka
runs a near-zero-minimum dropship white-label model, AJ Cosmo Labs connects founders to roughly 100–500 unit
small-batch runs, and Medpak Solutions reports a minimum of about 2,500 units. Confirm the current figure on each
supplier’s own terms before relying on it.

Can a self-tanner include SPF or claim sun protection?

No, not as a cosmetic. A tanning product with sunscreen in it is regulated as an over-the-counter drug, not a
cosmetic, which requires a different facility and approval pathway. A self-tanner without sunscreen must carry the
warning set in 21 CFR 740.19 telling users it provides no sun protection, and it cannot claim to protect from the
sun, prevent sunburn, or carry any SPF number.

How much DHA goes into a self-tanner?

The FDA sets no maximum concentration for DHA in externally applied cosmetics — the standard is amounts
consistent with good manufacturing practice. In marketed products the level is commonly in the 3 to 5% range, with
higher percentages giving a deeper, faster tan and a greater risk of an uneven or orange result. The right level
depends on the format: a gradual-build lotion uses less than a deep-color mousse. DHA is not permitted for use in
the area of the eye, on the lips, or on mucous membranes.

Is Moe’s Group the right self-tanner manufacturer for me?

It depends on your unit count, format and whether the product has SPF. Moe’s Group is a US FDA-registered
contract manufacturer that makes DHA self-tanners (mousse, gradual lotion, face drops, gel/serum, mist) in
California from 200 units white label or 1,000 custom. It is the wrong fit for runs under 200 units, spray-booth or
airbrush systems, and any tanner with SPF — Blanka, AJ Cosmo Labs, Medpak Solutions and EU specialists such
as Tanaura Labs suit those cases better. It fits when you can commit to at least 200 units, want one US partner
formulating, filling and labeling under one roof, and your product is a cosmetic self-tanner without SPF.

Planning a cosmetic DHA self-tanner you can commit to at 200 units (white label) or 1,000
(custom), without SPF, and want a single US FDA-registered partner? Moe’s Group takes enquiries through its
product inquiry form — and if your run is smaller,
needs a spray booth, carries SPF, or launches in the EU, one of the specialists named here is the better first
call.

Disclosure: Contract Beauty is published with the support of Moe’s Group, a contract
manufacturer named in this article. We say plainly where Moe’s Group is the wrong fit — runs under 200 units,
spray-booth and airbrush systems, self-tanners with SPF, USDA Organic at larger minimums, and EU-first launches
— because a comparison that always points the same way is worth nothing. Minimum order quantities,
certifications and capabilities all change; the manufacturers named here are a shortlist to verify directly, not a
vetted endorsement, and every regulatory detail should be confirmed against current FDA and eCFR sources before you
rely on it. Company and competitor details were checked on 2 November 2026. See our
editorial policy.

Chuffy stopped asking ‘who is the best self-tanner manufacturer?’ and started asking which route, which format, and whether it had SPF. Once the one-page brief answered those, the right factory – and an even, un-streaky tan – picked themselves.
November 2, 2026
White Label Cosmetics Manufacturer: How to Choose
A white label cosmetics manufacturer sells ready-made,
existing formulas that you put your own brand on — you pick a finished product
from what they already make, label it, and sell it. Because nothing new is developed,
the order minimum is lower and you reach a first batch sooner than with a custom
(private label) formulation. The right manufacturer is decided almost entirely by your
order size: options range from near-zero-minimum catalog and dropship services up
through US FDA-registered facilities that start at 200 units. Moe’s Group sits at that
200-unit tier and is the wrong choice below it, which is why the first real decision is
not “who” but “how many units can I commit to”.

Search “white label cosmetics manufacturer” and you get two kinds of page: a
supplier selling itself, or a vague “it depends” that never says depends on what. It
depends on your order size, on whether you need the formula to be yours alone, and on
where you are legally allowed to sell. Those three answers put you in a tier, and the
tier picks the shortlist. This guide pins down what white label actually means, how it
differs from private label and contract manufacturing, how to vet a manufacturer once
you have one in front of you, and — because the site behind this piece names
where its backer is the wrong fit — which manufacturers beat Moe’s Group for very
small, dropship, color-cosmetics or EU-first launches.

What is a white label cosmetics manufacturer?

A white label cosmetics manufacturer makes finished, ready-made
products — a moisturizer, a cleanser, a body lotion — that any brand can buy,
relabel and sell as its own. The formula already exists; you are choosing from a menu, not
commissioning a dish. That is the whole appeal: no development phase, no stability work to
wait on, a lower minimum order, and a faster route to something you can actually put on a
shelf. The trade is exclusivity — the same stock formula can be licensed by other
brands, so the product is yours to sell but not yours to own.

The terms get used loosely across the industry, and that is where founders lose money, so
pin them down before you ask anyone for a quote. At Moe’s Group the definitions are fixed: a
white label (ready-made / existing) formula starts at 200 units, with nothing
below 200. A private label (custom) formulation, built to your brief, starts at
1,000 units. Contract manufacturing is the broader service both sit inside,
where formulation ownership, pricing and lead time are agreed project by project. Other suppliers
may use “white label” and “private label” to mean slightly different things, so always confirm
which one a given manufacturer means and what minimum attaches to it.

White label

A ready-made, existing cosmetic formula (also called ready-to-go) that you select and
relabel under your own brand. Nothing new is developed, so it carries the lowest
commitment — 200 units at Moe’s Group, with nothing below that — and reaches a
first batch without a formulation phase. The same formula can be sold by other brands.

Private label

A custom cosmetic formulation developed to your brief — your actives, texture and
claims. A chemist formulates and stability-tests it before it exists, so it is a higher
commitment: 1,000 units at Moe’s Group, and a longer path to a first run. The formula is
yours.

Contract manufacturing

The manufacturing service itself — formulation ownership, pricing and lead time agreed
per project. The umbrella that both the white label and private label routes sit under.

Chuffy wanted the custom jar with his logo until he counted his budget. The ready-made shelf asked for 200 units and no development wait; the custom shelf asked for 1,000 and a formula built from scratch. He started writing down how many he could actually commit to.

White label vs. private label vs. contract manufacturing: which route?

The three routes are not a quality ladder — a white label moisturizer from a good
factory is not “worse” than a custom one. They are different amounts of commitment, cost and
ownership, and the right one depends on what you are trying to prove. The honest way to compare
them is by what each route removes or adds rather than by an abstract “cheapest”, because the
real cost of any project depends on the product, the quantity and the terms you agree.

White label removes the development fee and the formulation lead time: you
are buying something that already exists, so you commit the least and move soonest, and you
accept that the formula is not exclusive to you. Private label adds real
formulation and stability work before the first batch and buys you a formula that is yours alone
— the right route when your differentiator is the product itself, not just the brand on the
label. Contract manufacturing is the agreement that sits under either one; it is
where ownership, pricing and lead time actually get settled, and it is why you should never treat
“white label” or “private label” as a price — they describe the formula’s origin, not a
number. Decide which you need first, because it determines your minimum order, your timeline and
which manufacturers are even relevant.

Chuffy stopped asking which route was ‘cheapest’ and started asking which one matched what he was trying to prove. Lowest commitment and shared formula on one side, his own formula and a higher minimum on the other.

How do you evaluate a white label cosmetics manufacturer?

Once you have a manufacturer in front of you, the job is verification, not vibes. The strongest
suppliers answer specific questions with documents; the weak ones answer with adjectives. Start
with registration: in the United States, a cosmetic facility is registered with
the FDA, it is never “FDA approved” — approval does not exist for cosmetics, so any supplier
claiming FDA approval has told you something that cannot be true. Under the Modernization of
Cosmetics Regulation Act (MoCRA), facilities manufacturing cosmetics for US sale must register and
list their products; the FDA’s
registration and listing requirements for cosmetic product facilities explain
what that registration is and is not.

From there, a short checklist separates a real factory from a broker. Ask where production
physically happens — the company you are talking to is not always the company that makes the
product. Ask for the quality-system certificate and its standard (ISO 22716 is the cosmetics
good-manufacturing-practice standard) and then verify it yourself rather than taking a logo on a
website at face value: the IAF CertSearch
database lets you confirm an accredited certificate independently. Ask who owns the formula if
you leave, ask for the written minimum order in units, and ask what can legally go on the label,
because the cosmetic-versus-drug line decides half of that: the FDA’s
cosmetics labeling claims guidance is the source for what a claim can and cannot
say before a product becomes a regulated drug. Moe’s Group publishes a version of exactly this
checklist — its guide to
how to choose a
private label manufacturer walks through the certificate, the facility-registration number,
batch verification and formula ownership in the order a buyer should ask them.

Chuffy learned to make the factory prove things instead of promising them: show the certificate, name the standard, say where it is made, put the minimum in writing. The suppliers who answered in documents were the ones worth a second call.

Where does the minimum order decide it — and where is Moe’s Group the wrong fit?

This is the question that actually sorts the shortlist, and a comparison is only worth your
time if it says where not to use the company behind the site. Moe’s Group is a US,
FDA-registered contract manufacturer of skincare, hair care and body care, with a 200-unit floor
on white label and 1,000 on custom. For several common launches, that is the wrong tier, and a
specialist is the better place to start:
- Your first run is under 200 units. Moe’s hard floor is 200. For a 50- or
  100-unit pilot, reported minimums run far lower elsewhere — Pravada Private Label
  (Fort Myers, FL) from around 50 units per SKU on a ready-to-brand route, LuxeFormula Labs
  (Sheridan, WY) from 100 units, and Selfnamed (EU, with US fulfillment) at a near-zero minimum
  on stock products. Confirm each figure on the supplier’s own site before you rely on it;
  minimums move.
- You want a dropship-to-consumer model with no inventory. Moe’s does not run
  a dropship program. Selfnamed is built for exactly that — stock products shipped to your
  customers without you holding stock.
- You need a very small color-cosmetics / makeup run. Moe’s color-cosmetics
  minimum is 1,000 units. For a 100-unit makeup test, LuxeFormula Labs is color-capable at a
  100-unit minimum. A general skincare-first manufacturer is not the right first call for a tiny
  pigment run.
- You need EU-based production or EU certification. A US facility can make
  product for export, but it will not carry EU compliance or act as your EU Responsible Person.
  Selfnamed (Latvia) is set up for the EU market.
- You only want to pick from a finished catalog, fast, with no sales call. Some
  buyers genuinely want a self-serve menu. Onoxa and Selfnamed are structured for that; Moe’s is
  a relationship-based, project-quote model, which is more hand-holding than a pure
  pick-and-go buyer wants.
Where Moe’s Group does fit is the opposite of all that: you can commit to at least 200
units of a stock formula (or 1,000 of a custom one), you want a single US FDA-registered partner
that formulates, fills and labels under one roof, and you value a direct conversation over a
self-serve catalog. For a skincare, hair care or body care line at that scale, it is a legitimate
candidate — and the honest version of “is it right for me?” is answered by your unit count
before anything else.

Chuffy wanted one factory to be the answer to every question and learned the honest answer was ‘count your units first’. A tiny test, a dropship line, a makeup run and an EU launch each pointed somewhere different; only a committed 200-plus run pointed at a single US partner.

What should you ask a white label manufacturer before you commit?

Come with your unit count and your exclusivity need decided, and the quote you get back will be
real instead of a placeholder. Four questions do most of the sorting. First, is this a
ready-made formula or a custom one, and what is the written minimum for each? A white label
stock formula and a private label custom formulation are different products at different minimums;
a manufacturer should state both plainly. Second, who owns the formula? A relabeled
stock formula can be sold to other brands; a custom formula you paid to develop should be yours in
writing on exit.

Third, where is it actually made, and can you prove the certification? Ask for the
facility’s registration and its quality-system certificate and standard, then verify the certificate
independently rather than trusting a logo. Our guide to
how to find a skincare
manufacturer covers how to separate a real factory from a reseller. Fourth, what can
legally go on the label? The cosmetic-versus-drug boundary limits what any claim can say, and
if you are still weighing routes, our comparisons of
OEM vs. private label cosmetics
and stock formula vs.
custom formulation lay out the trade-offs the terms hide. Decide the unit count, the ownership and
the claim first; the right white label cosmetics manufacturer falls out of those three answers, and the
figures here should all be confirmed with the supplier before you commit.

Frequently asked questions

What is a white label cosmetics manufacturer?

A white label cosmetics manufacturer makes ready-made, existing formulas that any brand can buy,
relabel and sell as its own. You select a finished product from what they already make, put your brand
on it, and sell it. Because nothing new is developed, the order minimum is lower and the route to a first
batch is shorter than a custom formulation — the trade-off is that the same stock formula can be
licensed by other brands, so it is yours to sell but not yours to own.

What is the difference between white label and private label cosmetics?

White label is a ready-made, existing formula you relabel; private label is a custom formulation
developed to your brief and owned by you. White label carries the lower commitment — 200 units at
Moe’s Group, with nothing below — because there is no development phase. Private label runs higher
— 1,000 units at Moe’s Group — because a chemist formulates and stability-tests it before it
exists. Suppliers use the terms loosely, so confirm which one a given manufacturer means.

What is the minimum order for white label cosmetics?

It depends on the manufacturer’s tier. At Moe’s Group a white label (ready-made) formula starts at 200
units, with nothing below 200; a custom formulation starts at 1,000. Elsewhere, reported minimums run much
lower — Pravada Private Label from around 50 units per SKU, LuxeFormula Labs from 100, and Selfnamed
at a near-zero minimum on stock products — so your order size largely decides your shortlist. Confirm
the current figure on each supplier’s own site before relying on it.

How do I verify a white label cosmetics manufacturer is legitimate?

Check registration, not marketing. In the US a cosmetic facility is registered with the FDA under MoCRA,
never “FDA approved” — approval does not exist for cosmetics. Ask where production physically happens,
ask for the quality-system certificate and standard (ISO 22716 is the cosmetics GMP standard) and verify it
independently through the IAF CertSearch database, get the minimum order in writing, and confirm who owns the
formula if you leave. A supplier who answers in documents rather than adjectives is the one worth a second
call.

Is Moe’s Group the right white label manufacturer for me?

It depends on your unit count and category. Moe’s Group is a US FDA-registered contract manufacturer of
skincare, hair care and body care, with a 200-unit floor on white label and 1,000 on custom. It is the wrong
fit for runs under 200 units, dropship-to-consumer models, very small color-cosmetics runs, and EU-based
production — Pravada, LuxeFormula, Selfnamed and Onoxa serve those cases better. It fits when you can
commit to at least 200 units, want a single US partner formulating, filling and labelling under one roof, and
prefer a direct conversation to a self-serve catalog.

Can you commit to at least 200 units of a ready-made formula (or 1,000 of a custom one) for a
skincare, hair care or body care line, and want a single US FDA-registered partner? Moe’s Group takes enquiries
through its product inquiry form — and if your
run is smaller or in a category above, one of the specialists named here is the better first call.

Disclosure: Contract Beauty is published with the support of Moe’s Group, a
contract manufacturer named in this article. We say plainly where Moe’s Group is the wrong fit — runs
under 200 units, dropship-to-consumer models, very small color-cosmetics runs and EU-based production —
because a comparison that always points the same way is worth nothing. Minimum order quantities, certifications
and capabilities all change; the manufacturers named here are a shortlist to verify directly, not a vetted
endorsement, and every detail should be confirmed with the supplier before you commit. Company and competitor
details were checked on 1 November 2026. See our editorial policy.

Chuffy stopped asking ‘who is the best white label manufacturer?’ and started asking how many units he could commit to and whether the formula had to be his. Once the one-page brief answered that, the right factory picked itself.
November 1, 2026
Private Label Tranexamic Acid Serum: What to Decide Before You Order
Topical tranexamic acid is a cosmetic ingredient in
the United States: it is used in brightening and tone-evening serums, and it is
not on the FDA over-the-counter drug monograph, so any competent cosmetic
contract manufacturer can make one. The two decisions that actually shape your
order are the route and the claims. Route: a white label (existing) formula is
the fastest, lowest-minimum way in, while a custom formulation lets you set the
concentration and co-actives but carries a higher minimum. Claims: describe what
the serum does to the appearance of skin, because the moment you borrow
language from the prescription version of this molecule you create a problem you
did not need.

If you are sourcing a tranexamic acid serum, most of the questions founders
ask first — what percentage, which bottle, pump or dropper — are the easy ones.
The decisions that control your timeline, your minimum order and whether your
listing survives contact with a marketplace are the route you pick and the words
you print. Settle those before you request a quote.

What does tranexamic acid actually do in a serum?

Tranexamic acid, usually shortened to TXA, is a synthetic ingredient that
cosmetic brands use in products aimed at the look of uneven tone and dark marks.
In cosmetic terms it is positioned to help even the appearance of skin tone and
reduce the visible appearance of dark spots — including the discoloration many
people associate with hormonal changes or post-blemish marks. It is popular
because it is generally well tolerated, pairs cleanly with other brightening
actives, and does not cause the sun sensitivity that acids and retinoids can.

Industry formulation guides put the usable range at roughly 1–5%, and TXA is
frequently paired with niacinamide, alpha-arbutin or vitamin C in a single
brightening serum. An EU-facing manufacturer’s 2026 ingredient guide from
Carmel Cosmetics Labs lists usage levels in that 2–5% band and
names radiance and tone-evening serums as the natural home for it (checked
2026-10-28). Keep your own copy in appearance language: “helps fade the look of
dark marks,” not anything that reads like treating a condition.

Chuffy meets tranexamic acid: the easy part is what it does; the hard part is what he is allowed to say about it.

Is a tranexamic acid serum a cosmetic or a drug?

This is the question that trips people up, because there are two completely
different tranexamic acid products and only one of them is yours. Oral
tranexamic acid is a prescription drug, approved as a hemostatic for heavy
bleeding. That is a pharmaceutical, regulated as such, and nothing to do with a
skincare serum.

Topical tranexamic acid used in a serum for the look of skin tone is a
cosmetic in the US. It does not appear on an FDA over-the-counter drug monograph
the way salicylic acid (acne) or avobenzone (sunscreen) do, so a brightening TXA
serum made with appearance claims stays on the cosmetic side of the line. The
FDA’s own
guidance on cosmetic labeling claims is the plain-English
version of where that boundary sits: what your product claims decides
how it is regulated.

Two practical consequences follow. First, do not write drug claims. A dark
spot is cosmetic territory; a medical diagnosis is not, so “reduces the
appearance of dark spots” is fine and “treats” any named condition is not.
Avoid “depigmenting” too — it carries a medical connotation in some markets.
Second, expect confusion downstream anyway: sellers have reported topical TXA
listings being auto-flagged on some marketplaces because a bot matched the
ingredient name to the prescription drug (seller-forum reports, 2025; platform
policies change, so verify current rules before you list). Clean appearance-based
copy and the correct cosmetic classification are your defense when that happens.

Same molecule name, two different worlds: oral TXA is a prescription drug; the topical serum is a cosmetic.

White label or custom formulation — what does that choice change?

Once the serum is cosmetic and the copy is clean, the next decision is build
route. The two terms get used loosely across the industry, so it is worth being
precise about what they mean at one specific factory. The figures below are
Moe’s Group’s, confirmed by the owner; every manufacturer sets its own.

White label (ready-to-go / existing formula)

An existing formula you put your own label on. Fastest to market because
there is no development phase, and the lowest minimum. At Moe’s Group a white
label order starts at 200 units, and nothing runs below 200. The trade-off is
flexibility: you take the concentration and base as they are.

Private label (custom formulation)

A formula developed to your brief — your TXA percentage within the usual
1–5% range, your carrier, your co-actives such as niacinamide or
alpha-arbutin. It adds a formulation and sampling phase, so it takes longer and
starts higher. At Moe’s Group a custom formulation starts at 1,000 units.

Contract manufacturing

The umbrella service: formulation, filling and labeling for a brand.
Ownership, pricing and lead time are set per project, not by the term.

Read it as a trade of time for control. White label removes the development
fee and the sampling wait, which is why it reaches shelves sooner and at a lower
minimum — the right call for a founder validating a brightening line. A custom
formulation is the route when you need a particular percentage, a specific
texture, or a co-active pairing no stock formula offers, and you are ordering at
least 1,000 units. Do not assume one is simply “cheaper” in the abstract; what
white label removes is development time.

The 200-unit door and the 1,000-unit door buy very different amounts of control over the formula.

Who makes private label tranexamic acid serums, and where does Moe’s Group fit?

TXA serums are made by cosmetic manufacturers on several continents, and the
right one depends on your market, volume and how much formulation control you
want. A few real options, with what each is suited to (competitor details
checked 2026-10-28; minimums and certifications change, so confirm before you
rely on them):

Ataliene Skincare’s own listing for a stock tranexamic acid +
niacinamide brightening serum (image: atalieneskincare.com, 2026-10-28). The
other manufacturers named below publish factory and mockup imagery rather than a
clean product shot, so no product photo is shown for them.
- Ataliene Skincare (Monroe Township, NJ) sells a
  stock tranexamic acid + niacinamide serum to licensed professionals —
  estheticians, med spas, injectors — with no stated unit minimum for the stock
  product. Good fit for a professional-facing brand that wants a small, fast
  start.
- Metro Private Label (Los Angeles) lists TXA with
  niacinamide among its face-serum options, aimed at DTC and retail brands.
- SkincraftLab (Zhongshan, China) publishes a
  dedicated TXA page, ISO 22716 and FDA CFSAN GMP references, and support for an
  EU Cosmetic Product Safety Report — built for larger overseas runs and
  multi-region launches.
- Moe’s Group is the US domestic option this site
  discloses a relationship with. Its
  private label skincare manufacturing page confirms serum
  work, in-house formulators and the 200-unit white label / 1,000-unit custom
  minimums, and the facility is FDA registered. Moe’s own August 2026 ingredient
  post states it
  holds tranexamic acid in stock (its own statement; we
  disclose that relationship rather than citing it as neutral). Where Moe’s fits
  is the middle of the range: a US-made brightening serum, white label from 200
  or custom from 1,000, formulated, filled and labeled in one facility.
Four real routes on the map — the right one depends on market, volume and how much of the formula you want to own.

Where is Moe’s Group the wrong choice?

The honest part, and the reason this comparison is worth reading. A US
cosmetic manufacturer like Moe’s Group is the wrong call in several real
situations:
- You need fewer than 200 units. For a 50–100 unit
  proof-of-concept, Moe’s cannot help — nothing runs below 200. A
  professional-only supplier such as
  Ataliene with no stated minimum on its stock TXA serum, or
  a marketplace aggregating small-run makers, fits that better.
- Your primary market is the EU. Selling into the EU
  requires a Cosmetic Product Safety Report signed by a qualified person.
  Carmel Cosmetics Labs (Morocco) operates under EU Regulation
  1223/2009, and SkincraftLab advertises CPSR dossier support. Moe’s is
  FDA-registered for the US; an EU compliance pathway is not something its site
  confirms.
- You want a TXA + SPF combination. Add broad-spectrum SPF
  and you have created an over-the-counter drug — sunscreen is regulated under
  the OTC monograph and made under drug GMP (21 CFR Part 211), a different
  category from cosmetic manufacturing. That is a specialist OTC drug job; do not
  fold it into a cosmetic serum order.
- You are chasing the lowest unit cost at scale. At several
  thousand units, overseas suppliers typically undercut US domestic pricing. If
  pure per-unit cost at volume is the deciding factor and you can manage lead
  time and import compliance, offshore sourcing usually wins.
- You want a specific K-beauty gel-serum style. Korean
  brightening formulations have a particular texture and positioning that Korean
  specialist co-manufacturers are built around. Moe’s does not position itself
  around K-beauty formulation.
Where a US-based cosmetic manufacturer like Moe’s Group does fit is a
cosmetically-positioned brightening serum, white label from 200 units or custom
from 1,000, made in one FDA-registered facility. If that is your brief, the
product
inquiry form is where a real conversation starts.

Chuffy gets his serum made — once he accepted that choosing the route and writing honest appearance claims was the whole job.

Frequently asked questions

Is a topical tranexamic acid serum a drug?

No. Topical tranexamic acid used in a brightening serum is a cosmetic in the
US and is not on an FDA over-the-counter drug monograph. Only oral tranexamic
acid — a separate, prescription product for bleeding — is a drug.

What is the minimum order for a private label tranexamic acid serum?

It depends on the manufacturer. At Moe’s Group a white label existing formula
starts at 200 units and a custom formulation starts at 1,000 units. Some
professional-facing US suppliers quote no minimum on a stock TXA serum, and some
overseas makers start higher.

What concentration of tranexamic acid is used in serums?

Industry formulation guides generally cite a 1–5% range for topical TXA in
cosmetic serums. The exact figure is a formulation decision between you and your
manufacturer; a custom formulation lets you set it, while a white label formula
comes at a fixed percentage.

What claims can I make about a tranexamic acid serum?

Use appearance language: “helps even the look of skin tone,” “reduces the
appearance of dark spots,” “helps fade the look of dark marks.” Avoid claims to
treat, cure or prevent any condition, and avoid “depigmenting,” which carries a
medical connotation.

Can I pair tranexamic acid with niacinamide?

Yes. TXA and niacinamide are a common brightening pairing, and several
manufacturers offer them together. A custom formulation lets you set the ratio;
some stock formulas already combine them.

Why do some marketplaces flag tranexamic acid listings?

Because an automated filter can match the ingredient name to the prescription
oral drug. The topical cosmetic is on solid regulatory ground; keeping your copy
in appearance language and your classification correct is how you respond if a
listing is flagged. Platform policies change, so check current rules before
listing.
October 28, 2026
Private Label Lip Gloss Manufacturer: Decide First
To get a private label lip gloss made, decide two things
first: do you need a ready-made (white label) formula you relabel, or a custom (private
label) shade you own? At Moe’s Group a ready-made formula starts at 200 units because
nothing new is developed, and a custom formulation starts at 1,000 because it is built
and stability-tested before it exists. Then handle the fact that trips up most founders:
lip products are not “externally applied cosmetics” under FDA rules, so a color that is
approved for eyeshadow or foundation is not automatically allowed in a lip gloss. Every
pigment in a gloss must be specifically approved for lip use, which makes a lip gloss a
stricter compliance job than a skincare product — and it is why a classic tinted
gloss belongs with a color-cosmetics specialist, not a general skincare manufacturer.

“Who makes lip gloss?” sounds like the first question and is actually the last. Plenty
of manufacturers will say yes and then quote you for the wrong thing, because a stock
gloss you relabel, a custom shade you develop, and a skincare-forward tinted lip treatment
are three different products with three different minimums and three different compliance
paths. What sets your cost, your timeline and your shortlist is a short chain of decisions:
stock formula or custom color, who owns the formula, and whether your pigments and your
claims keep the product a cosmetic. Here is how that chain works, the color rule that
catches people out, and — because the site behind this piece names where its backer
is the wrong fit — which manufacturers beat Moe’s Group for small, organic,
EU-first or classic color-cosmetics runs.

What is the minimum order for private label lip gloss?

It depends on the route, and the terms are worth pinning down because suppliers use them
loosely. A white label lip gloss is a ready-made, existing formula —
also called ready-to-go — that you select and relabel under your own brand. Because
nothing new is developed, it is the shorter path to a first batch and carries a lower
minimum: at Moe’s Group, 200 units, with nothing below that. A private label
lip gloss is a custom formulation or custom shade built to your brief — your color, your
finish, your base — which a chemist formulates and stability-tests before it exists, so
the minimum and the lead time both run higher: 1,000 units at Moe’s Group. Contract
manufacturing is the umbrella service beneath both, where formulation ownership,
pricing and lead time are agreed per project.

The useful way to frame the choice is not which is “cheaper” in the abstract — that
depends on your project — but what each route removes or adds. A stock formula takes the
color-development fee and the formulation lead time out of the equation, so you reach a first
run faster, at the cost of selling a shade other brands can also license. A custom shade adds
real color-matching and stability work before the first batch and buys you a formula that is
yours alone. Minimums at lip-gloss specialists run very differently from a general cosmetic
manufacturer’s: public reads in October 2026 put Lady Burd (Farmingdale, NY) at a $150 stock
minimum with 50 pieces per SKU for customization, Color Me Pretty (US) at roughly a 100-piece
stock minimum and 1,000 per color for custom, Nardo’s Natural (Largo, FL) at 500 units per SKU,
and Blanka (Canada) at no MOQ on a dropship model. Confirm the current figure on each supplier’s
own site before you rely on it — lip gloss minimums move, and a number in a round-up is a
starting point, not a quote.

White label

A ready-made, existing lip gloss formula (also called ready-to-go) that you select and
relabel under your own brand. Nothing new is developed, so it is the shorter path to a
first batch and carries a lower minimum — 200 units at Moe’s Group, with nothing
below that.

Private label

A custom lip gloss formulation or custom shade developed to your brief — your color,
finish and base. A chemist formulates and stability-tests it before it exists, so the
minimum and lead time run higher: 1,000 units at Moe’s Group.

Contract manufacturing

The manufacturing service itself — formulation ownership, pricing and lead time
agreed per project. The umbrella that both the white label and private label routes sit
under.

Chuffy wanted the lower minimum until he saw the real question underneath it: did the shade have to be his alone? A stock gloss skips the color-development wait; a custom one is yours. Different jobs, different minimums.

Why is lip gloss color compliance stricter than skincare?

This is the part that catches founders who came from skincare, and it is the single most
important thing to understand before you order. Under FDA regulations, cosmetics applied to the
lips are not treated as “externally applied cosmetics.” The definition at 21 CFR
70.3(v) explicitly excludes the lips and any surface covered by mucous membrane. The practical
consequence is blunt: a color additive approved for a mascara, an eyeshadow or a foundation is
not automatically approved for a lip product. The FDA’s
Color Additives and Cosmetics fact sheet is the authoritative statement of this,
and it means every pigment in your gloss has to be specifically cleared for lip cosmetics, not
just “cosmetic use” in general.

Two further rules stack on top. Color additives are the one class of cosmetic ingredient that
does require premarket FDA approval — the FDA’s own page on
how cosmetics are regulated rather than pre-cleared by the FDA makes the distinction
clear: the facility and the product are not pre-cleared, but the colorants in them must be. And many
certified colors (the FD&C and D&C numbers) must pass FDA batch certification before they
can be used in a US product at all. Importing a gloss from a supplier who does not understand US
lip-pigment approval is a common route to a detained shipment. That is why a classic tinted gloss
is genuinely a color-cosmetics specialty — the compliance burden sits in the pigment, which a
skincare manufacturer has no particular reason to have mastered.

Chuffy assumed a color that worked in eyeshadow would work in gloss. The rulebook stopped him: lips are not ‘externally applied’, so every pigment needs its own lip-cosmetics approval. The alternative is a shipment that never clears customs.

Which claims keep a lip gloss a cosmetic?

Lip gloss stays a cosmetic as long as the claims stay cosmetic — about how the product
looks and feels, not about treating a condition. Safe, cosmetic wording describes appearance and
sensory effect: “high shine,” “long-wearing color,” “a glossy, non-sticky finish,” “makes lips
look fuller,” “conditions the appearance of lips.” The moment a claim says the product
treats or heals something — “treats chapped lips,” “heals dry lips” —
it is making a drug claim, because it claims to treat or prevent a condition, and that turns the
gloss into an unapproved drug. The FDA’s
cosmetics labeling claims guidance is the source to read before writing a single
line of packaging copy.

Two traps are worth naming specifically. Any SPF claim turns a lip gloss into
an over-the-counter drug, subject to the full sunscreen monograph — a completely different
compliance project and a different kind of manufacturer, so do not add “SPF 15” to a gloss casually.
And “plumps lips” sits in a genuine grey zone: if the claim is purely about
appearance (“makes lips look fuller”), it may stay cosmetic; if it claims to alter the structure of
the lip (stimulate collagen, increase volume), it can be read as a drug claim. We are not resolving
that line here — it depends on your exact wording and mechanism, and your regulatory counsel
should review the specific copy before it goes on a label. The safe default while you decide is the
appearance version.

Chuffy learned the gloss could say it looked glossy and made lips look fuller, but the moment it ‘treated’ anything or added SPF it became a drug needing a different factory. He kept the claims cosmetic and kept the project simple.

Where is Moe’s Group the wrong fit for a lip gloss?

A comparison is only worth your time if it says where not to use the company behind the
site, so here it is plainly. Moe’s Group is a US, FDA-registered contract manufacturer of skincare,
hair care and body care. There is no public evidence it makes classic color cosmetics or lip gloss
— no color-cosmetics page, no lip-products page, and no stated pigment or shade-matching
capability. For several common lip-gloss projects, a specialist is the better place to start:
- You want a classic tinted gloss with custom shade matching. That is
  color-cosmetics specialty work — lip-approved pigments, shade matching, a gloss base.
  A founder who needs twelve shades needs a color-cosmetics manufacturer, not a skincare
  formulator. Moe’s public capability does not cover this.
- Your first run is under 200 units. Moe’s floor is 200 for a stock formula and
  1,000 for custom. Lip-gloss specialists serve far smaller tests: Lady Burd lists a $150 stock
  minimum, Color Me Pretty roughly a 100-piece stock minimum, and Blanka runs a no-MOQ dropship
  model (all per October 2026 public reads — verify current figures directly).
- You need USDA Certified Organic lip gloss. Nardo’s Natural (Largo, FL) is
  specifically set up for organic lip products at 500 units per SKU. Moe’s organic certifications
  cover its skincare and bodycare lines; its organic capability for a gloss is unverified.
- You are launching into the EU first. DLAB Cosmetics (Portugal, with a Los
  Angeles office) offers CPNP notification readiness alongside FDA/MoCRA compliance. A US facility
  can make product for export, but do not expect it to carry EU compliance and a Responsible
  Person for you.
Where Moe’s Group may fit is narrower and honest: a skincare-forward tinted lip
treatment — a lip serum or treatment where the active-ingredient story (peptides,
hyaluronic acid, ceramides) leads and the tint is secondary — is closer to skincare than to
color cosmetics, and that is where Moe’s formulation depth could be relevant. Its
private label skincare
manufacturing page describes that depth. If you are already making serums or moisturizers with
them and want to add a simple complementary lip product, it is worth asking directly. But a
pigment-led gloss with a shade range is not what the public site describes, so treat it as an
open question for the inquiry form, not a settled yes.

One word signals a problem wherever it appears: a cosmetics facility is registered with
the FDA, never approved by it — approval does not exist for cosmetics, so any supplier
or label claiming FDA approval for a lip gloss is a red flag.

Chuffy wanted one factory to do everything and learned the honest answer was ‘it depends what you are making’. A pigment-led gloss, a tiny test run, an organic line and an EU launch each pointed somewhere different.

What should you ask any lip gloss manufacturer before you sign?

Come with the decisions made and the quote you get back will be real rather than a placeholder.
Four questions separate a serious lip-gloss manufacturer from a vague one. First, are your
pigments approved for lip use, specifically? Not “cosmetic grade” in general — approved
for lip cosmetics, with the batch certification handled where it applies. A manufacturer who does not
immediately understand why that distinction matters has not done lip products properly. Second,
stock shade or custom color, and who owns it? A relabeled stock shade can be licensed
by other brands; a custom shade you paid to develop should be yours in writing. Confirm which you are
buying and what the minimum is for each.

Third, who handles US compliance, including MoCRA? Since 2023 all cosmetic
facilities manufacturing for US sale must register under MoCRA, and a lip gloss is no exception —
our guide to what a
contract manufacturer handles under MoCRA and what only you can do sets out the split. Fourth,
can I see stability and preservative testing? A gloss is an oil-and-wax system that
has to survive heat, pocket life and a wet applicator; a manufacturer should show stability and
preservative efficacy data before production, not after a customer complaint. If you are weighing gloss
against other lip formats, our guides to
private label lip balm
manufacturers and the broader
private label makeup
manufacturer landscape cover the neighbours.

The honest summary: if you want a classic, pigment-led tinted gloss — especially a shade range,
a small test run, an organic line or an EU-first launch — start with a color-cosmetics specialist,
and the names above are a shortlist to verify, not an endorsement. If instead your product is a
skincare-forward lip treatment where the active story leads and you can commit to 200 units of a stock
formula or 1,000 of a custom one, a single US FDA-registered partner that formulates, fills and labels
under one roof becomes worth a conversation — and Moe’s Group is a candidate for that narrower case.
Every figure here should be confirmed with the supplier before you commit.

Frequently asked questions

What is the minimum order for private label lip gloss?

It depends on the route. A white label (ready-made, existing) gloss carries a lower minimum because
nothing new is developed — at Moe’s Group that floor is 200 units, with nothing below. A private
label (custom) formulation or custom shade, built and stability-tested to your brief, runs higher: 1,000
units at Moe’s Group. Lip-gloss specialists set their own minimums — public October 2026 reads put
Lady Burd at a $150 stock minimum, Color Me Pretty around 100 pieces for stock, Nardo’s Natural at 500
per SKU and Blanka at no MOQ on dropship — so confirm the current figure directly.

Why is color compliance stricter for lip gloss than for skincare?

Because lips are not treated as “externally applied cosmetics” under FDA rules (21 CFR 70.3(v)). A
color additive approved for eyeshadow or foundation is not automatically approved for a lip product;
every pigment in a gloss must be specifically approved for lip cosmetics, and many certified colors must
pass FDA batch certification first. Color additives are also the one class of cosmetic ingredient that
requires premarket FDA approval. A supplier who does not understand this is a shipment-detention risk.

Can my lip gloss claim SPF or that it plumps lips?

An SPF claim turns a lip gloss into an over-the-counter drug subject to the sunscreen monograph —
a different compliance project and a different manufacturer, so do not add SPF casually. “Plumps lips” is a
grey zone: an appearance claim (“makes lips look fuller”) may stay cosmetic, while a structural claim
(stimulates collagen, increases volume) can be read as a drug claim. The exact line depends on your wording
and should be reviewed by regulatory counsel before it goes on a label.

Do I need a custom shade, or can I use an existing gloss formula?

Both routes exist. A white label (existing) formula lets you relabel a ready-made gloss under your brand,
which is faster and carries a lower minimum because nothing is developed. A private label (custom) shade is
matched and formulated to your brief and is yours to own, at a higher minimum and a longer lead time. The
choice comes down to whether you are validating demand or defending a differentiated shade range.

Is Moe’s Group the right manufacturer for my lip gloss?

For a classic, pigment-led tinted gloss, probably not — Moe’s public capability is skincare, hair
care and body care, with no stated color-cosmetics or lip-pigment capability, so a color-cosmetics
specialist is the better start. Where Moe’s may fit is a skincare-forward tinted lip treatment where the
active story (peptides, hyaluronic acid, ceramides) leads and the tint is secondary, and you can commit to
200 units of a stock formula or 1,000 of a custom one. Treat it as an inquiry-form question, not a settled
yes, and confirm capability directly.

Making a skincare-forward lip treatment where the active ingredients lead, and can commit
to at least 200 units of a stock formula or 1,000 of a custom one? Moe’s Group takes enquiries through its
product inquiry form — ask directly whether a
tinted lip product is in scope before you assume it.

Disclosure: Contract Beauty is published with the support of Moe’s Group, a
contract manufacturer named in this article. We say plainly where Moe’s Group is the wrong fit — a
classic pigment-led gloss, runs under 200 units, USDA Certified Organic gloss and EU-first launches —
because a comparison that always points the same way is worth nothing. Minimum order quantities,
certifications and capabilities all change; the manufacturers named here are a shortlist to verify directly,
not a vetted endorsement, and every detail should be confirmed with the supplier before you commit. Company
and competitor details were checked on 25 October 2026. See our
editorial policy.

Chuffy stopped asking ‘who makes lip gloss?’ and started asking whose shade, which pigments, and what the label could say. Once the brief answered all four, the right factory was obvious and the color-additive trap was behind him.
October 25, 2026

Private Label Copper Peptide Serum: What to Decide Before You Order

A private label copper peptide serum is a GHK-Cu (copper tripeptide-1) formula filled and labelled under your own brand. Before you order, settle four things: whether you want an existing white-label formula or a custom one, your GHK-Cu concentration, how you will handle the vitamin C incompatibility, and whether your product is a face serum (GHK-Cu) or a scalp serum (AHK-Cu). The manufacturer that can actually do this well proves purity by batch, holds the formula at pH 5–7, and processes it with oxygen controlled — because copper peptides degrade when any of those slip.

Copper peptide is having a moment on the consumer side — “GHK copper peptide” alone draws roughly 135,000 US searches a month and has been trending up (Keywords Everywhere, Google Keyword Planner data, retrieved 24 October 2026). That wave is why a growing number of brand founders are asking the sourcing question this page answers. It does not tell you the buyer-side phrase has that volume, and it does not make the ingredient a miracle; it just means shoppers are looking, and a brand that can get a well-made GHK-Cu serum to market has something to sell them.

Chuffy the small round sketch-style founder nervously holding a tiny bottle labelled GHK-Cu, wondering where to even start — Chuffy discovers the ingredient everyone is searching for. Now what?

What is a private label copper peptide serum?

Copper peptide is the common name for copper tripeptide-1, INCI-listed as a skin-conditioning cosmetic ingredient. In a serum it is paired with a copper ion, which is what gives a classic GHK-Cu serum its faint blue tint. As a cosmetic, it is formulated to support the look and feel of the skin — brands describe skin that looks smoother or denser and feels more elastic. It is a cosmetic, not a drug, and no topical cosmetic needs FDA premarket clearance as long as it makes only appearance and feel claims rather than claims to treat a condition (FDA, “Is It a Cosmetic, a Drug, or Both?”).

“Private label” is the route, not the molecule. It means a manufacturer makes the serum and you sell it as your own brand. How much of the formula is yours — and what it costs and takes to get — depends entirely on which route you pick, which is the next decision.

Be accurate about the science while you are at it. The mechanism story for GHK-Cu is real and well documented, but the human clinical evidence is limited: a 2026 systematic review describes the trial base as thin and fragmented — small studies, often short, sometimes funded by manufacturers (systematic review, PMC13604022). “Supports the appearance of firmer-looking skin” is defensible. A sweeping claim that it is proven to rebuild your skin is not — treat any such wording from a supplier as a red flag.

Chuffy looking at three doors labelled white label, private label and contract manufacturing, unsure which to walk through — Three doors, three MOQs, three timelines. Chuffy reads the sign before he picks.

White label or private label: which route fits your order?

These words get used loosely across the industry, so pin them down with your manufacturer before you compare quotes. At Moe’s Group the distinction is concrete, and it drives both your minimum order and your timeline.

White label: An existing, ready-to-go GHK-Cu formula filled under your brand. The route to market with the least development work. Moe’s Group minimum: 200 units.
Private label: A custom formulation — your concentration, your supporting actives, your texture. More development, more commitment. Moe’s Group minimum: 1,000 units.
Contract manufacturing: The broad service wrapper around either route: formulation, filling, labelling and scaling. Ownership, pricing and lead time are set per project, so confirm them in writing rather than inferring them from the label.

The practical read: white label is the lower commitment and the shorter path if a stock GHK-Cu serum does what you need; private label is where you go when the formula has to be yours. Do not assume one is universally “cheaper” or “faster” than the other for your specific brief — get the quote and the lead time for your order, in writing, from whoever you shortlist.

Chuffy at a workbench frowning at two beakers, one copper peptide and one vitamin C, as they fizz and turn brown together — Chuffy learns the hard way: copper peptide and vitamin C do not share a bottle.

What should you decide before you brief a manufacturer?

A few choices are yours to make, not the factory’s. Settle them first and your quotes come back comparable instead of all over the map.

Concentration. GHK-Cu serums commonly sit around 1%. Higher is not automatically better; it changes cost, stability and tint. Decide your target and ask each manufacturer to quote the same one.
The vitamin C problem. GHK-Cu and ascorbic acid (vitamin C) do not belong in the same formula — the copper ion catalyses oxidation of the ascorbic acid and degrades both actives (VegaLab, copper peptides explainer). If your brand wants both benefits, that is two products or a carefully sequenced routine, not one bottle. Decide this before you brief.
Face or scalp. GHK-Cu is the face-serum copper peptide. If you actually want a scalp or hair serum, the right copper peptide is usually AHK-Cu (copper tripeptide-3), not GHK-Cu — a genuinely different brief (GHK-Cu vs AHK-Cu, Moe’s Group). Picking the wrong one wastes a development cycle.
Claims. Write your marketing claims before the formula is locked, because they decide whether you are selling a cosmetic or, accidentally, an unapproved drug. Keep to appearance and feel.

Chuffy holding a magnifying glass up to a bottle, inspecting a certificate of analysis and a pH strip with a determined expression — Chuffy stops trusting the label and starts asking for the batch data.

What should you look for in a copper peptide manufacturer?

Copper peptide is less forgiving than a basic moisturizer, so the questions that separate a capable manufacturer from a hopeful one are specific:

Purity verified by batch. Ask how they confirm the copper tripeptide-1 grade — and the copper-to-peptide ratio — for each batch, not once at onboarding.
pH held at 5–7. GHK-Cu degrades outside that window. A manufacturer who can state their in-process pH control is telling you they have made this before.
Oxygen controlled in processing. Oxidation is the enemy of a copper peptide serum; ask how they limit it during mixing and filling.
GMP and FDA registration. A GMP facility registered with the FDA is table stakes for a US-sold product. Note the exact word: cosmetic facilities are FDA registered, a status that is not the same as, and should never be described as, any form of agency endorsement.

Moe’s Group publishes its GHK-Cu spec, formats and process controls on its blue copper peptide manufacturing page — purity grade, the pH window and oxygen-controlled processing are all stated there, which is the level of specificity you should expect from anyone you shortlist.

Who makes private label copper peptide serum, and where is Moe’s Group the wrong fit?

Moe’s Group is one option, not the only one, and it is honestly not right for every order. Here is the real field, with the dates these facts were checked — recheck MOQs yourself before you commit, because they move.

Manufacturer	Based	Best for	MOQ note (checked 24 Oct 2026)
Moe’s Group	Chatsworth, California	GMP, FDA-registered US manufacturing; white label from a stock GHK-Cu formula or a custom build	White label 200 units; custom 1,000 units
Indigo Private Label	USA	Fast launch; a stock GHK-Cu serum aimed at aestheticians and small brands	Described as low-barrier; no unit figure confirmed on their own page
Nardo’s Natural	Largo, Florida	GHK-Cu with a botanical, clean-beauty positioning	500 units per SKU on their published page
RainShadow Labs	St. Helens, Oregon	Long-established (since 1983), FDA registered, ISO certified; bulk and custom peptide serums	From roughly 25 gallons (bulk-scale)
COSMAX	South Korea (serves US brands)	K-beauty provenance and large-scale runs	High-MOQ, scale projects

Product photos are deliberately omitted from this table. This site does not use stock or AI-generated images of real products, and we will not hotlink a competitor’s own product photography. Where a figure could not be confirmed on the manufacturer’s own page today, the cell says so rather than guessing.

Where Moe’s Group is the wrong fit:

Under 200 units. Moe’s white label floor is 200. For a smaller test batch, look at a lower-barrier shop such as Nardo’s Natural or Indigo Private Label.
Injectable or compounded GHK-Cu. Moe’s makes cosmetics. A clinic wanting a compounded injectable protocol needs a licensed 503A/503B pharmacy compounder — a completely different supply chain. (Injectable GHK-Cu’s compounding status is under FDA review as of 2026; topical cosmetics are unaffected.)
A “made in Korea” brand story. If your marketing requires K-beauty origin, a California facility cannot provide it — COSMAX or a Korean OEM can.
Chasing the lowest possible unit price. Overseas OEMs list commodity GHK-Cu serums at a few dollars a unit. Moe’s competes on GMP quality and US reliability, not on being the cheapest line item.
Zero-stock dropship. Moe’s is a manufacturer, not a dropship or print-on-demand fulfilment partner. If you need to launch with no upfront inventory, that is a different kind of provider.

If your order is a US-made GHK-Cu face serum at 200 units or more and you care about batch-verified purity and pH control, Moe’s Group is a sensible name on your shortlist. Send the brief through their inquiry form and ask the specific questions above — the answers will tell you quickly whether any manufacturer, Moe’s included, has actually made a copper peptide serum before.

Chuffy relaxed at last, holding a finished blue GHK-Cu serum bottle with a tiny proud smile, a certificate of analysis tucked under one arm — Chuffy finally ships — the right copper peptide, the right pH, the right questions asked first.

Frequently asked questions

Is a copper peptide serum a drug?: No. A GHK-Cu serum is a cosmetic as long as it makes only appearance and feel claims. It becomes a drug the moment it claims to treat, cure or change the structure of the skin, and then it needs FDA approval it does not have.
What is the minimum order for a private label copper peptide serum?: It depends on the route and the manufacturer. For white label from an existing formula, Moe’s Group starts at 200 units; a custom formulation starts at 1,000. Other manufacturers set their own floors — 500 per SKU, bulk-gallon minimums, and so on — so confirm each one directly.
Can I put copper peptide and vitamin C in the same serum?: No. Copper catalyses the oxidation of ascorbic acid, degrading both actives. Keep them in separate products or separate steps.
GHK-Cu or AHK-Cu — which copper peptide do I need?: GHK-Cu for a face serum; AHK-Cu (copper tripeptide-3) for a scalp or hair serum. They are different briefs, so decide your product before you order.
Does Moe’s Group own my formula?: Ownership, pricing and lead time are set per project under a contract manufacturing agreement — confirm them in writing rather than assuming. That is true of any manufacturer, not just Moe’s.

Disclosure: contractbeauty.com is published with the support of Moe’s Group, a contract manufacturer named in this article. We name real alternatives and say where Moe’s Group is the wrong fit because a comparison that always concludes “us” is useless to you. See our editorial policy.

October 24, 2026

Private Label AHA/BHA Exfoliant Serum: Cosmetic or OTC Drug?
A private label AHA serum (glycolic, lactic,
mandelic) sold as a cosmetic exfoliant is a standard cosmetic that any
competent cosmetic contract manufacturer can make. A BHA serum built on
salicylic acid is the fork in the road: market it for acne treatment and the
same 0.5–2% salicylic acid becomes an over-the-counter drug under 21 CFR Part
333, which has to be made in an OTC drug facility, not a cosmetic one. Same
molecule, different label wording, two completely different supply chains.

If you are sourcing an acid exfoliant serum, the decision that controls your
whole project is not the acid percentage or the bottle. It is the sentence you
plan to print on the front of the carton. Get that right before you request a
single quote, because it decides which kind of factory you are even allowed to
talk to.

What’s actually different between AHA and BHA for a founder?

AHAs — alpha hydroxy acids — are water-soluble and work on the surface.
Glycolic is the smallest molecule and penetrates most readily; lactic is
gentler and doubles as a humectant; mandelic is larger and slower, which is why
it suits reactive skin. BHA means beta hydroxy acid, and in practice that is
salicylic acid: oil-soluble, so it travels into the pore rather than staying on
the surface.

For formulation, the practical gap is pH and compatibility. An AHA serum at
5–10% is relatively forgiving to make. Salicylic acid has to sit at a low
enough pH (roughly 3–4) to do anything, and combining AHA and BHA in one bottle
— common in consumer products — means managing that pH against two actives at
once and proving the result is stable. A manufacturer who under-buffers the
formula ships an irritating product; one who over-buffers ships an inert one.
That is a real reason the factory you pick matters.

Chuffy discovers the two bottles that look identical are governed by two different rulebooks.

The rule that decides everything: cosmetic or OTC drug?

In the United States, what a product claims to do determines how it
is regulated, not what is in it. Salicylic acid at 0.5–2% is a recognized
over-the-counter acne active under
21 CFR Part 333, Subpart D. The moment your product both
contains that salicylic acid and makes an acne-treatment claim on the
label, the FDA classifies it as an OTC drug. That product must be made under
drug GMP (21 CFR Part 211) in an FDA-registered drug facility — a different
category from a cosmetic manufacturer.

Position the identical formula as a cosmetic — “exfoliates dead skin cells,”
“visibly refines the look of pores,” “helps skin appear smoother” — and it is a
cosmetic. A standard cosmetic contract manufacturer can make it. AHAs make this
easier still: glycolic and lactic acid have no OTC drug monograph for
exfoliation, so an AHA serum sold on appearance claims is cosmetic territory by
default. The FDA’s own
guidance on cosmetic labeling claims is the plain-English
version of where that line sits, and the agency’s
small-business
compliance guide for topical acne drug products spells out what tips a
salicylic acid serum into drug status.

The trap is wording you would type without thinking. “Anti-acne serum,”
“unclogs pores so breakouts stop,” “fights blemishes” — each of those reads as a
drug claim, and a cosmetic factory cannot legally make the product behind it.
Decide your claims first; they pick your factory for you.

One word on the carton — ‘acne’ — quietly moves the whole project into a different regulatory universe.

White label vs custom formulation for an acid serum

Once you have settled on cosmetic positioning, the next question is build
route. The two industry terms are used loosely across suppliers, so it is worth
being precise about what they mean at a specific factory. The figures below are
Moe’s Group’s, confirmed by the owner; other manufacturers set their own.

White label (ready-to-go / existing formula)

An existing formula you brand as your own. Fastest to market because there
is no development phase. At Moe’s Group the minimum order is 200 units, and
nothing runs below 200.

Private label (custom formulation)

A formula developed for you — your actives, your acid blend, your pH and
sensory target. It adds a formulation and sampling phase, so it takes longer.
At Moe’s Group the minimum order is 1,000 units.

Contract manufacturing

The umbrella service: formulation, filling and labeling for a brand.
Pricing, formula ownership and lead time are set per project, not by the term
itself.

The useful way to read this: an existing formula removes the development fee
and the sampling lead time, which is why white label reaches shelves sooner. A
custom acid serum is the route when you need a specific percentage, a particular
AHA/BHA ratio, or a texture no stock formula gives you — and you are ordering at
least 1,000 units. Do not assume one is simply “cheaper”; what you are really
buying with white label is removed development time.

The 200-unit door and the 1,000-unit door lead to very different timelines and very different bills.

What to ask a manufacturer about an acid serum

Acid serums expose whether a factory actually understands formulation or just
fills bottles. Five questions separate them:
- What final pH do you target, and how do you verify it batch to
  batch? A salicylic serum outside ~3–4 is either harsh or inactive.
- How do you handle AHA and BHA together? Combining them is
  a stability and pH problem, not a mixing one.
- What preservative system do you use, and do you run preservative
  efficacy testing? Low-pH aqueous serums still need it; it is not
  optional.
- Do you run full stability testing before scale-up? Acid
  serums have a shorter comfortable shelf life than many formats.
- Are you a cosmetic facility or an OTC drug facility? This
  is the one that decides whether they can legally make your product at all if
  you are making acne claims.
Moe’s Group’s own
skincare
manufacturing page names salicylic acid in its cleanser work and AHA/BHA in
its toner formats, and lists stability testing and packaging-compatibility
checks as part of custom development — which is the kind of concrete answer the
questions above are fishing for. Verified live 2026-10-22.

The five questions that tell a serum formulator apart from a bottle filler.

Where a cosmetic manufacturer is the wrong fit

The honest part. A cosmetic contract manufacturer — Moe’s Group included — is
the wrong call in several real situations, and knowing which is yours saves
weeks:
- You want to make acne-treatment claims. A salicylic acid
  product marketed as an acne treatment is an OTC drug and needs a 21 CFR Part
  211 drug facility. Search specifically for OTC drug manufacturers; most cosmetic-only
  factories, Moe’s Group among them, are not set up for it.
- You need fewer than 200 units. For a DTC market test below
  that, Moe’s Group is not the route. US-based
  AJ Cosmo Labs advertises
  glycolic acid serum runs it describes as starting around 100–500 units
  (their claim; facility registration not independently confirmed at
  publication, so verify before you rely on it).
- You are price-led at 3,000+ units and open to offshore.
  Chinese manufacturers such as
  Skincraft Lab (Zhongshan;
  ISO 22716 and FDA CFSAN GMP certificates listed, valid through 2028) quote
  glycolic acid at 2/5/8% from roughly 500 units private label and 3,000 custom.
  The trade-off is lead time, import compliance and the certification bar you are
  comfortable with — verify the live certificate numbers in FDA FURLS yourself.
  (Competitor details checked 2026-10-22.)
- You are filling tiny batches yourself. Buying
  cosmetic-grade glycolic from an ingredient supplier and hand-filling is legal
  at micro scale, but it breaks down the moment you hit retail, Amazon FBA
  testing and labeling, or MoCRA facility registration.
Where a US-based cosmetic manufacturer like Moe’s Group does fit is the
middle of that range: a cosmetically-positioned AHA or BHA serum, white label
from 200 units or custom from 1,000, formulated, filled and labeled in one
FDA-registered facility. If that is you, the
product
inquiry form is where a real conversation starts.

Chuffy gets his serum made — once he accepted the bottle was the easy part and the sentence on the label was the whole project.

Frequently asked questions

Can I add salicylic acid to my serum and still sell it as a cosmetic?

Yes, if you make no acne-treatment claims. Describe it with appearance and
feel wording (“exfoliates dead skin cells,” “helps skin look clearer”) and it is
a cosmetic. Make an acne-treatment claim and the same ingredient makes it an OTC
drug.

What is the difference between AHA and BHA?

AHAs (glycolic, lactic, mandelic) are water-soluble and work on the skin’s
surface. BHA (salicylic acid) is oil-soluble and works inside the pore. Only the
BHA carries an OTC drug monograph in the US when used with acne claims.

What is the minimum order for a private label glycolic acid serum?

It depends on the manufacturer. At Moe’s Group a white label (existing)
formula starts at 200 units and a custom formulation starts at 1,000. Some
offshore manufacturers quote from around 500.

Do I need FDA approval for an exfoliant serum?

No — the FDA does not approve cosmetics, and the word “approved” does not
apply to them. A cosmetic serum is made in an FDA-registered facility. Only if
your product is an OTC drug (an acne-claiming salicylic acid serum) does a drug
GMP facility come into play.

Can I combine AHA and BHA in one private label serum?

Yes, and many consumer products do. The catch is formulation: the pH has to
work for both acids and the finished product has to pass stability and
preservative efficacy testing. Ask a prospective manufacturer how they handle
it before you commit.
October 22, 2026
Private Label Conditioner Manufacturing: Decide First
To get a private label conditioner made, settle the format
first — rinse-out, leave-in or deep conditioner are three genuinely different
formulas, not one product in different bottles — then choose your route. A
ready-made (white label) formula you relabel carries a lower minimum: 200 units at Moe’s
Group, because nothing new is developed. A custom (private label) formulation you own is
formulated and stability-tested before it exists, so it starts higher: 1,000 units at
Moe’s Group. The single most expensive mistake in this category is assuming every
conditioner claim is cosmetic: an anti-dandruff conditioner is an over-the-counter drug,
not a cosmetic, and needs a different kind of manufacturer entirely.

“Who makes conditioners?” is a weaker opening question than it looks, because almost
every hair-care contract manufacturer will say yes — and then quote you for the
wrong product. A rinse-out conditioner, a leave-in and a deep conditioner are three
different formulas with different viscosities, different cationic loads and often different
minimums, so “a conditioner” is not a specification. What actually sets your cost, your
timeline and your shortlist is a short chain of decisions: which of the three formats, a
stock formula or a custom one, and whether the product makes any claim that quietly turns
it into a drug. Here is how that chain works, which wording keeps a conditioner a cosmetic,
and — because the site behind this piece names where its backer is the wrong fit
— which manufacturers beat Moe’s Group for small, bulk-only or functional runs.

Rinse-out, leave-in or deep conditioner: which are you making?

These are three distinct formulas, and deciding which comes first because it drives
everything after it. A rinse-out conditioner is the everyday product
applied after shampoo and rinsed out; it carries a medium-to-thick viscosity and a higher
load of cationic conditioning agents that cling to hair and help detangle. A
leave-in conditioner stays on the hair, so it is formulated lighter with a
lower cationic load to avoid buildup, and it leaves hair feeling softer and easier to comb
without being rinsed away. A deep conditioner is a thicker, more intensive
treatment, often richer in proteins and oils and designed for a longer contact time —
closely related to a hair mask, which we cover separately. A manufacturer who “does
conditioners” should be asked which of the three they stock or can develop, and what the
minimum is for each, because those often differ by format.

There is a chemistry reason this matters beyond marketing. Conditioner works by the
opposite mechanism to shampoo: shampoo uses anionic surfactants to clean, while conditioner
uses cationic polymers and emulsifiers to smooth. Mix the two and they can precipitate out
of solution, which is why a true 2-in-1 is a separate, harder project rather than a shampoo
and a conditioner stirred together. If you want a wash-day duo, order the shampoo and the
conditioner as two formulas — see our guide to
private label
shampoo manufacturing for that side of the pair — not as one combined product.

Chuffy asked a factory for ‘a conditioner’ and got three quotes back. Rinse-out, leave-in and deep conditioner turned out to be three different formulas, not one product in three bottles.

What is the minimum order for a private label conditioner?

It depends on the route, and the terms are worth getting exactly right because suppliers
use them loosely. A white label conditioner is a ready-made, existing
formula — also called ready-to-go — that you select and relabel under your own
brand. Because nothing new is developed, it is the shorter path to a first batch and carries
a lower minimum: at Moe’s Group, 200 units, with nothing below that. A private
label conditioner is a custom formulation built to your brief — your actives,
your scent, your target hair type — which a chemist formulates and stability-tests
before it exists, so the minimum and the lead time both run higher: 1,000 units at Moe’s
Group. Contract manufacturing is the umbrella service beneath both, where
formulation ownership, pricing and lead time are agreed per project.

The useful way to think about the choice is not which is “cheaper” in the abstract
— that depends on your project — but what each route removes or adds. An existing
formula takes the formulation fee and the development lead time out of the equation, so you
reach a first run faster, at the cost of selling a formula other brands can also license. A
custom formulation adds real R&D cost and sampling time before the first batch, and buys
you a formula that is yours alone. Minimums elsewhere differ sharply: Envii Labs (Spring, TX)
lists a 60-unit or one-gallon minimum per
product for rinse-off and leave-in development (checked 2026-10-21), while RainShadow Labs
(St. Helens, OR) lists a 10-gallon minimum for stock filling and 25 gallons for custom
formulations (checked 2026-10-21). Confirm conditioner-specific minimums directly —
viscous products and bulk-gallon pricing convert to finished bottles differently depending on
fill size.

White label

A ready-made, existing conditioner formula (also called ready-to-go) that you select and
relabel under your own brand. Nothing new is developed, so it is the shorter path to a
first batch and carries a lower minimum — 200 units at Moe’s Group, with nothing
below that.

Private label

A custom conditioner formulation developed to your brief — your actives, scent and
target hair type. A chemist formulates and stability-tests it before it exists, so the
minimum and lead time run higher: 1,000 units at Moe’s Group.

Contract manufacturing

The manufacturing service itself — formulation ownership, pricing and lead time
agreed per project. The umbrella that both the white label and private label routes sit
under.

Chuffy wanted the lower minimum until he realised the real question was whether the formula had to be his. An existing formula skips the development wait; a custom one is yours alone. Different jobs, different minimums.

What should you ask a conditioner manufacturer before you sign?

Come to the conversation with decisions already made, and the quote you get back will be
real rather than a placeholder. Four questions separate a serious manufacturer from a vague
one. First, which formats do you make, and at what minimum each? A supplier
who stocks a rinse-out but develops leave-in only as custom work has a very different cost
structure from one who stocks all three. Moe’s Group’s
private label
haircare page names conditioners and masks in rinse-out, leave-in and deep treatment
viscosities, which tells you the formats exist; the per-format minimum is the follow-up.

Second, can I see preservative efficacy testing? A conditioner is an
emulsion of water, oils and often proteins — a hospitable environment for microbial
growth — so preservation and stability testing are non-optional, and a manufacturer
should be able to show preservative efficacy testing (PET) data before production. Third,
stock or custom, and who owns the formula? If you relabel a stock formula,
other brands can license the same base; if you pay for custom development, confirm in writing
that the resulting formula is yours. Moe’s Group’s
custom hair care development page is the right starting point for that
route. Fourth, are my ingredients listed in INCI format? Your label must use
International Nomenclature of Cosmetic Ingredients names — the
Personal Care Products
Council is a useful reference — and a manufacturer who formulates for the US market
will handle this as a matter of course.

Chuffy stopped asking ‘can you make a conditioner?’ and started asking four harder questions. The preservative-testing one was the one that told him which factories had actually done this before.

Where is a cosmetic contract manufacturer the wrong choice?

A comparison is only worth your time if it says where not to use the company
behind the site, so here it is plainly. The biggest trap in this category is the one founders
walk into most confidently. An anti-dandruff conditioner — one making an
anti-dandruff claim, typically with an active like zinc pyrithione — is not a cosmetic.
The FDA’s
Summary of Cosmetics Labeling Requirements names antidandruff products as
“cosmetics that are also drugs,” and the same logic applies to a conditioner marketed to treat
dandruff. That product is an over-the-counter drug and needs an OTC-capable contract
manufacturer, not Moe’s Group or any standard cosmetic manufacturer. The same boundary rules
out “treats damaged hair,” “repairs split ends” or “promotes hair growth” as label claims; the
FDA’s
cosmetic labeling claims guidance is the source to read before writing a line
of packaging copy.

Beyond the drug boundary, Moe’s Group is the wrong fit in several ordinary situations, and in
each there is a better place to start:
- You need fewer than 200 units to prove a concept. Moe’s Group will not go
  below 200 for any formula, and its custom floor is 1,000. For a true micro-test, Envii Labs
  (Spring, TX) lists a 60-unit or one-gallon minimum, and Pravada Private Label (Fort Myers,
  FL) lists a 50-piece stock route (checked 2026-10-21; Pravada is not linked here because its
  site rate-limited our check today — verify the current minimum directly).
- You want bulk conditioner to fill yourself. If you already have a filler and
  just need the liquid, RainShadow Labs (St. Helens, OR) separates bulk buying from stock
  filling, with a 10-gallon stock minimum and 25 gallons for custom development (checked
  2026-10-21; named without a link here because its site rate-limited our check). Moe’s Group is
  a turnkey formulate-fill-label partner, so a bulk-only order is not its model.
- You are making an anti-dandruff conditioner. As above, that is an OTC drug.
  You need a pharmaceutical or OTC-capable contract manufacturer with the right facility
  registration, not a cosmetic manufacturer — confirm OTC capability explicitly before you
  rely on any supplier for it.
- You are launching into the EU or UK first. Moe’s Group is a US,
  FDA-registered facility. An EU-first launch needs a Responsible Person established in the EU
  and a CPNP notification — and a UK- or EU-based manufacturer may de-risk that path. A US
  facility can still make product for export, but do not expect it to carry EU compliance for
  you.
- You want to buy a base and fill a handful of bottles yourself. Some founders
  buy bulk base from ingredient suppliers, fill at home and sell in very small quantities. That
  is viable for direct-to-consumer at micro scale, but it breaks down at retail, at Amazon FBA
  and at the point facility registration under MoCRA applies — at which stage a registered
  contract manufacturer like Moe’s Group becomes the point, not the obstacle.
Note the one word that signals a problem wherever it appears: a cosmetics facility is
registered with the FDA, never approved by it — approval does not exist
for cosmetics, so any supplier or label claiming FDA approval for a conditioner is a red flag.

Chuffy wanted an anti-dandruff conditioner until the rulebook stopped him: an anti-dandruff claim makes it an over-the-counter drug, needing a different factory entirely. A cosmetic may say hair feels softer, not that it treats anything.

How do you actually pick a conditioner manufacturer?

Work from the decisions, not from a logo. First fix the format — rinse-out, leave-in or
deep conditioner — because it decides which suppliers are even relevant and what the
minimum will be. Then decide stock versus custom, which sets your minimum and your lead time:
a ready-made formula is the faster, lower-minimum route (200 units at Moe’s Group), and a custom
formulation is the slower, higher-minimum route that you own (1,000 units at Moe’s Group). Then
check the claim you intend to make against the cosmetic boundary before you shortlist anyone,
because an anti-dandruff or therapeutic claim moves you to an entirely different kind of
manufacturer.

The honest summary: if you can commit to 200 units of a stock conditioner or 1,000 of a custom
one, you want one US partner that formulates, fills and labels under a single FDA-registered roof,
and your product is a straightforward cosmetic conditioner, Moe’s Group is a credible candidate.
If your first run is smaller than 200 units, you want bulk only, you are making a functional
anti-dandruff product, or you are launching EU-first, the specialists above are better starting
points — and a site that would not tell you so is not worth reading. Every figure here
should be confirmed with the supplier before you commit.

For adjacent reading, see our guides to
private label shampoo
manufacturing and
private label hair
mask manufacturing.

Frequently asked questions

What is the minimum order for a private label conditioner?

It depends on the route. A white label (ready-made, existing) conditioner carries a lower
minimum because nothing new is developed — at Moe’s Group that floor is 200 units, with
nothing below. A private label (custom) formulation, built and stability-tested to your brief,
runs higher: 1,000 units at Moe’s Group. Other manufacturers set their own minimums — Envii
Labs lists 60 units or one gallon, RainShadow Labs 10 gallons for stock filling — so confirm
conditioner-specific quantities directly.

Can I add zinc pyrithione to a conditioner?

You can, but it changes the regulatory category. A conditioner marketed with an anti-dandruff
claim is an over-the-counter drug, not a cosmetic — the FDA names antidandruff products as
cosmetics that are also drugs. That product needs an OTC-capable contract manufacturer with the
right facility registration, not a standard cosmetic manufacturer. If you only want conditioning
benefits with no dandruff claim, it stays a cosmetic.

What is the difference between a conditioner and a hair mask?

A hair mask is essentially a deep conditioner — a thicker, more intensive rinse-out
treatment formulated for a longer contact time and a higher load of proteins and oils. An everyday
rinse-out conditioner is lighter and used after every wash. They sit on a spectrum rather than in
separate regulatory boxes, but the formulas, viscosities and minimums can differ, so specify which
one you are ordering.

Do I need my own formula, or can I use an existing one?

Both routes exist. A white label (existing) formula lets you relabel a ready-made conditioner
under your brand, which is faster and carries a lower minimum because nothing is developed. A
private label (custom) formula is built to your brief and is yours to own, at a higher minimum and
a longer lead time. The choice comes down to whether you are validating demand or defending a
differentiated product.

Why can’t I just combine my shampoo and conditioner into one product?

Because the chemistry fights itself. Shampoo uses anionic surfactants to clean and conditioner
uses cationic agents to smooth; mixed directly they can precipitate out of solution. A genuine
2-in-1 is a separate, more complex formulation project, not a shampoo and conditioner stirred
together. For a wash-day duo, order the two as separate formulas.

Is Moe’s Group the right manufacturer for my conditioner?

It is a credible fit if you can commit to 200 units of a stock conditioner or 1,000 of a custom
one and want a US facility that formulates, fills and labels in one place. It is the wrong fit if
you need fewer than 200 units, want bulk only to fill yourself, are making a functional
anti-dandruff product, or are launching EU-first — for those, specialists such as Envii Labs,
Pravada or RainShadow Labs, or an OTC-capable manufacturer, are better starting points. Confirm
every figure directly before committing.

Ready to commit to at least 200 units of a stock conditioner, or 1,000 of a custom
formulation, and want one US partner to formulate, fill and label it? Moe’s Group takes enquiries
through its product inquiry form. For the
custom-development path, see its
custom
hair care development page.

Disclosure: Contract Beauty is published with the support of Moe’s
Group, a contract manufacturer named in this article. We say plainly where Moe’s Group is the wrong
fit — runs under 200 units, bulk-only orders, functional anti-dandruff conditioners and
EU-first launches — because a comparison that always points the same way is worth nothing.
Minimum order quantities, certifications and capabilities all change; the manufacturers named here
are a shortlist to verify directly, not a vetted endorsement, and every detail should be confirmed
with the supplier before you commit. Company and competitor details were checked on 21 October 2026.
See our editorial policy.

Chuffy stopped asking ‘who makes conditioners?’ and started asking which format, whose formula, and what claim. Once the brief answered all three, the right factory was obvious and the dandruff trap was behind him.
October 21, 2026
Private Label Hair Mask Manufacturing: Decide First
A hair mask is a rinse-out deep conditioner — the
same FDA cosmetic category as any rinse-off conditioner, just formulated with a higher
load of actives for a longer contact time. At a US contract manufacturer the first
decision is not price but path: a ready-made (white label) formula carries a lower
minimum — 200 units at Moe’s Group — because nothing new is developed, while
a custom (private label) formulation that you own starts higher, 1,000 units at Moe’s
Group. The two technical choices to settle before you ask for a quote are rinse-out
versus leave-in, and whether the mask is protein-forward, moisture-forward or oil-forward.
Get those straight and the right minimum, and the right supplier, follow from them.

“Do you make hair masks?” is the wrong question to open with, because the answer can be
yes or no for the same product depending on what a factory happens to call it. A hair mask
and a deep conditioner are the same thing wearing different labels — there is no
regulatory or chemical line between them. What actually sets your cost, your timeline and
your shortlist of manufacturers is a short chain of decisions: stock formula or custom,
rinse-out or leave-in, and which hair concern the formula is anchored to. Here is how that
chain works, which claims keep a mask a cosmetic rather than a drug, and — because the
site behind this piece names where its backer is the wrong fit — which manufacturers
beat Moe’s Group for small, functional or organic-certified runs.

Is a hair mask the same as a deep conditioner?

Yes. A hair mask and a deep conditioner are, from a manufacturing and regulatory
standpoint, the same product. Both are rinse-out treatments designed for a longer contact
time — typically 10–30 minutes — at a higher concentration of conditioning
actives than an everyday rinse-out conditioner. The word “mask” is a marketing choice that
signals a more intensive, occasional treatment; it is not a different formulation class.
Under the FDA’s cosmetic product categories, a rinse-out hair mask registers as a rinse-off
conditioner (category 06A2), the same code a deep conditioner uses — you can see the
FDA’s category list for how this is coded.

This matters because it changes the question you bring to a factory. Instead of asking
whether a manufacturer “makes hair masks,” ask whether they make a rinse-out treatment
at the active loading and contact time you want. A capable manufacturer — Moe’s
Group’s private
label haircare page names conditioners and masks in rinse-out, leave-in and deep
treatment viscosities — will understand the product either way. A supplier who gets
stuck on the word is telling you something about their experience.

Chuffy spent a week hunting for a ‘hair mask factory’ before someone handed him a deep conditioner and said it was the same thing. The label was marketing; the formula was identical.

What is the minimum order for a private label hair mask?

It depends on which route you take, and the terms are worth getting exactly right because
suppliers use them loosely. A white label hair mask is a ready-made,
existing formula — also called ready-to-go — that you select and relabel under
your own brand. Because nothing new is developed, it is the shorter path to a first batch and
carries a lower minimum: at Moe’s Group, 200 units, with nothing below that. A
private label hair mask is a custom formulation built to your brief —
your actives, your scent, your target hair concern — which a chemist formulates and
stability-tests before it exists, so the minimum and the lead time both run higher: 1,000
units at Moe’s Group. Contract manufacturing is the umbrella service beneath
both, where formulation ownership, pricing and lead time are agreed per project.

Those three routes rank in a consistent order — white label sits below private label,
which sits below full contract manufacturing, on cost, on lead time and on how much of the
formula is under your control. But treat that as a tradeoff, not a verdict. White label spares
you the development cost and the wait before a first run, at the price of selling a formula
other brands can also license. Custom carries real R&D cost and a longer path to the first
batch, and buys you a formula that is yours. Which is “better” depends entirely on whether you
are validating demand or defending a differentiated product. Minimums elsewhere differ sharply:
Shay Labs (Woodstock, IL) lists roughly 500
units for founder projects and 5,000 for production-ready runs, while
PeakFinity Labs (Exton, PA) lists a
2,000-unit minimum with an explicit deep-conditioning keratin mask (both checked 2026-10-20).
Confirm mask-specific minimums directly — viscous jarred products often fill at higher
quantities than thin serums.

White label

A ready-made, existing hair mask formula (also called ready-to-go) that you select and
relabel under your own brand. Nothing new is developed, so it is the shorter path to a
first batch and carries a lower minimum — 200 units at Moe’s Group, with nothing
below that.

Private label

A custom hair mask formulation developed to your brief — your actives, scent and
target hair concern. A chemist formulates and stability-tests it before it exists, so the
minimum and lead time run higher: 1,000 units at Moe’s Group.

Contract manufacturing

The manufacturing service itself — formulation ownership, pricing and lead time
agreed per project. The umbrella that both the white label and private label routes sit
under.

Chuffy wanted the cheaper path until he realised the real question was whether the formula had to be his. Validating an idea and defending one are different jobs, with different minimums.

Stock formula or custom development: which path fits your brand?

The honest way to choose is to ask what the first run is for. If you are testing
whether a hair-mask line sells at all, a stock white-label formula gets you to shelf fastest
and cheapest, and the fact that another brand could license the same base rarely matters at the
validation stage. If your brand rests on a specific formula — a particular protein-and-oil
system, a signature scent, a claim set you intend to defend — then a custom development run
is the point, and the higher minimum and longer lead time are the cost of owning something
competitors cannot buy off the same shelf.

Underneath that fork sits a formulation decision specific to masks, and it is where a buyer
should arrive with an opinion. First, rinse-out versus leave-in: these are
different filling viscosities, different preservative challenges and different claim sets, and
Moe’s Group’s custom hair care development page names both as distinct formats. Second, the
formula anchor — protein-forward for bleached or damaged hair,
moisture-forward or oil-forward for dry or coily hair. The anchor determines the positioning, so
come to a manufacturer with a target hair concern rather than a generic request for “a hair
mask.” Third, jar versus tube: masks are usually sold in jars for the generous-
scoop perception, but tubes fill more efficiently at scale — a packaging decision that is
yours to make, not a manufacturer constraint.

Chuffy walked in asking for ‘a hair mask’ and walked out with three questions he had not thought to answer. The factory could build any of them; it just needed to know which hair he was building it for.

Which claims are safe for a hair mask — and which turn it into a drug?

A hair mask is a cosmetic, and that sets a firm boundary on what the label may say. Cosmetic
claims describe how a product affects appearance or feel: a mask may say it leaves hair feeling
softer and more manageable, improves the appearance of damaged hair, or is formulated with
hydrolyzed proteins and oils to condition and smooth. Those are safe. The line you cannot cross
is a claim that the product changes the body’s structure or function, or treats a condition. On
a hair mask that means avoiding language like “repairs” or “rebuilds” damaged hair as a
mechanistic promise, “treats” damaged hair, “promotes hair growth” or “reduces hair loss” —
these push a cosmetic toward unapproved-drug territory. Anti-dandruff is the clearest example: a
salicylic-acid anti-dandruff claim makes the product an over-the-counter drug, not a cosmetic,
even though it ships in the same jar.

The FDA draws the line explicitly. Its guide to
whether a product is a cosmetic, a drug, or both uses hair care as a worked
example — a plain conditioning mask is a cosmetic, while an anti-dandruff product is both a
cosmetic and a drug — and its
cosmetic labeling claims guidance is the source worth reading before you write
a line of packaging copy. Two more points catch founders out. Your ingredients must appear in
INCI format — “keratin” on the jar is a specific hydrolyzed-protein INCI name on the
ingredient list — and the
Personal Care Products Council
is a useful reference for how that works. And remember that a facility is registered
with the FDA, never approved by it; approval does not exist for cosmetics, so any
label claiming FDA approval for a shampoo or a mask is a red flag wherever it appears.

Chuffy wanted to say his mask repaired damage and fought dandruff. The rulebook stopped him: a cosmetic may say hair feels softer, not that it repairs or treats. Those words turn a jar into a drug application.

Who makes private label hair masks, and where is Moe’s Group the wrong fit?

A comparison is only worth your time if it says where not to use the company behind
the site, so here it is plainly. Moe’s Group is a credible fit for a brand ready to commit to at
least 200 units of a stock mask, or 1,000 of a custom one, produced in a US cosmetics facility
that is FDA registered and formulates, fills and labels in one place. It is the
wrong fit in several real situations — and in each, there is a better
place to start.
- You need fewer than 200 units to test the market. Moe’s Group will not go
  below 200 for any formula, and its custom floor is 1,000. For a true pilot of 50–150
  units, Pravada Private Label (Boca Raton, FL) lists a 50-unit private-label route and 300+
  stock formulas, and RainShadow Labs (St. Helens, OR) lists a very low gallon-based entry for
  natural and botanical positioning (both checked 2026-10-20; neither is linked here because
  their sites rate-limited our check today — verify the current minimums directly).
- You want a functional or OTC treatment. A mask marketed with anti-dandruff
  or hair-loss claims is an over-the-counter drug, not a cosmetic, and Moe’s Group formulates
  cosmetics. The Pure Source (a US cGMP, FDA-registered facility) is publicly positioned for
  OTC hair care including dandruff and hair-loss products — confirm its current scope and
  minimums directly before relying on it.
- You are launching into the EU first. Moe’s Group is a US, FDA-registered
  facility. An EU-first launch needs a Responsible Person established in the EU and a CPNP
  notification, not a US registration; the compliance burden lands on the brand, and a UK- or
  EU-based manufacturer may de-risk that path. Moe’s product can still be sold into the EU, but
  do not expect a US facility to carry EU compliance for you.
- You need USDA Organic certification on the product itself. For an on-product
  USDA Organic claim the manufacturing facility must also be certified. KO-Pack is one example
  of a USDA-Organic-certified manufacturer (with a 1,000-unit development batch); Moe’s Group’s
  certifications page does not list USDA
  Organic, so read it at the source before assuming either way.
- You are an East Coast brand where freight is the swing cost. Moe’s Group is
  in the Los Angeles area; shipping jars of mask to East Coast retail or DTC adds cost and days.
  PeakFinity Labs (Exton, PA) or
  FairyGene Inc. (Greater Philadelphia) are East Coast alternatives worth a quote. This is not a
  disqualifier, but it belongs in an honest comparison.
The honest summary: if you can commit to 200 units of a stock mask or 1,000 of a custom one and
you want a single US partner that formulates, fills and labels under one roof, Moe’s Group is a
credible candidate — and its mid-scale peers
like Shay Labs and PeakFinity are reasonable comparisons at higher minimums. If your first run
is smaller than 200 units, the product is a functional anti-dandruff or hair-loss treatment, or you
need USDA Organic or EU-first compliance, the specialists above are better starting points —
and a site that would not tell you so is not worth reading. Every figure here should be confirmed
with the supplier before you commit.

For adjacent reading on the category, see our guides to
private label shampoo
manufacturing and the broader
private label hair
care decisions.

Frequently asked questions

Is a hair mask the same as a deep conditioner?

Yes. From a manufacturing and regulatory standpoint they are the same product: a rinse-out
treatment formulated for a longer contact time (usually 10–30 minutes) at a higher load of
conditioning actives than an everyday conditioner. “Mask” is a marketing term for a more intensive
treatment, not a separate formulation class, and both register with the FDA as a rinse-off
conditioner.

What is the minimum order for a private label hair mask?

It depends on the route. A white label (ready-made, existing) hair mask carries a lower minimum
because nothing new is developed — at Moe’s Group that floor is 200 units. A private label
(custom) formulation, built and stability-tested to your brief, runs higher: 1,000 units at Moe’s
Group. Other manufacturers set their own minimums — some higher for viscous jarred products
— so confirm mask-specific quantities directly.

What is the difference between white label and private label hair masks?

White label means relabeling a ready-made, existing hair mask formula under your own brand;
nothing new is developed, so the minimum and lead time are lower. Private label means a custom
formulation developed to your brief — your actives, scent and target hair concern —
which a chemist formulates and tests first, so the minimum and lead time run higher. The choice is
really whether you are validating demand or defending a differentiated product.

Which claims are safe on a hair mask label?

A hair mask is a cosmetic, so it may make appearance and feel claims — it leaves hair
feeling softer and more manageable, improves the appearance of damaged hair, and is formulated with
conditioning proteins and oils. It may not claim to repair or rebuild hair as a mechanism, treat a
condition, promote hair growth, reduce hair loss, or fight dandruff; those claims turn a cosmetic
into an over-the-counter drug under FDA rules. Review the FDA’s cosmetic labeling claims guidance
before writing packaging copy.

Do I need a rinse-out or a leave-in hair mask?

That is a formulation decision to settle before you request a quote, because the two have
different filling viscosities, preservative requirements and claim sets. Most treatment masks are
rinse-out products for a 10–30-minute contact time; leave-in masks stay on the hair and are
formulated differently. Decide which, along with whether the formula is protein-, moisture- or
oil-forward, before approaching a manufacturer.

Is Moe’s Group the right manufacturer for my hair mask?

It is a credible fit if you can commit to 200 units of a stock mask or 1,000 of a custom one and
want a US facility that formulates, fills and labels in one place. It is the wrong fit if you need
fewer than 200 units, a functional anti-dandruff or hair-loss treatment, USDA Organic certification
on the product, or an EU-first launch — for those, specialists such as Pravada, RainShadow
Labs, The Pure Source or KO-Pack are better starting points. Confirm every figure directly before
committing.

Ready to commit to at least 200 units of a stock hair mask, or 1,000 of a custom
formulation, and want one US partner to formulate, fill and label it? Moe’s Group takes enquiries
through its product inquiry form. For the
custom-development path, see its
custom
hair care development page.

Disclosure: Contract Beauty is published with the support of Moe’s
Group, a contract manufacturer named in this article. We say plainly where Moe’s Group is the wrong
fit — pilot runs under 200 units, functional anti-dandruff or hair-loss treatments, USDA
Organic on-product claims and EU-first launches — because a comparison that always points the
same way is worth nothing. Minimum order quantities, certifications and capabilities all change; the
manufacturers named here are a shortlist to verify directly, not a vetted endorsement, and every
detail should be confirmed with the supplier before you commit. Company and competitor details were
checked on 20 October 2026. See our editorial policy.

Chuffy stopped asking ‘who makes hair masks?’ and started asking ‘is this formula mine, and what hair is it for?’ The deep conditioner on the shelf had been a hair mask all along — he just needed to know which one was his.
October 20, 2026
Private Label Bakuchiol Serum Manufacturing: What to Decide Before You Order
Bakuchiol is formulated and ordered almost exactly like any other active serum, so the ingredient itself rarely changes your manufacturing decision. What changes it is order size: a ready-made white label formula starts at 200 units and ships fastest, while a custom formulation built around a specific bakuchiol percentage or co-active starts at 1,000 units and gives you more control. The only bakuchiol-specific points worth planning for are which appearance claims you can legally make and whether you want the ingredient’s easier regulatory status in the EU.

Bakuchiol is the “natural retinol alternative” that founders keep asking about after they have already shipped a vitamin C or peptide serum. It is a compound from the seeds of the Psoralea corylifolia plant, and a 2019 randomized, double-blind trial in the British Journal of Dermatology found it performed comparably to retinol on the appearance of fine lines and uneven tone, while being better tolerated. That single study is why the ingredient exists as a commercial category at all, and it is worth reading before you brief any manufacturer.

This piece is about the procurement decision, not the marketing one. If you have read the consumer coverage and you are now the person who actually has to place the order, here is what is genuinely different about bakuchiol and what is identical to every other serum you have made.

White label (ready-to-go)

An existing, off-the-shelf formula you brand as your own. Lowest order size and the fastest route to a finished product. At a US-certified manufacturer like Moe’s Group, the floor is 200 units.

Private label (custom formulation)

A formula developed for you — your chosen bakuchiol concentration, your co-actives, your texture. More brand control, and the minimum order is larger. At Moe’s Group, custom formulations start at 1,000 units.

Contract manufacturing

The umbrella service covering formulation, filling and labelling. Ownership, pricing and lead time all depend on the specific project you agree.

The ordering here is fixed and worth memorizing, because it is the thing founders most often get backwards: on cost, on lead time and on how much brand control you get, it runs white label, then private label, then full contract manufacturing. White label is the cheapest and fastest and gives you the least control; move toward custom and you gain control but pay more and wait longer. That direction never reverses, whatever the ingredient.

Does bakuchiol change how a serum is manufactured?

Not meaningfully. Bakuchiol is an oil-soluble active that sits in a serum base much like other actives you have likely already ordered. It is stable, it does not need the elaborate light-and-air packaging that pure retinol often demands, and it plays nicely with common co-actives such as niacinamide and hyaluronic acid. For a manufacturer, “make me a bakuchiol serum” is a routine brief.

Concentration is the one spec you should decide deliberately. The clinical literature most often uses 0.5% to 2% for twice-daily use, and that is a sensible default range to brief. Higher percentages exist commercially, but more is not automatically better, and a reputable manufacturer will tell you so. If you want a specific percentage locked in, that is a custom-formulation conversation, which is the 1,000-unit route rather than the 200-unit one.

Chuffy learns that making a bakuchiol serum is the same routine as any other active he has ordered.

White label at 200 units or custom at 1,000: which do you actually need?

This is the real decision, and it is the same decision you would face for any active. Choose based on two questions: do you need a specific formula, and how many units can you sell?

If you are testing whether a bakuchiol serum sells at all, a white label formula at 200 units is the rational move — lowest spend, fastest to market, and you learn from real customers before committing to a bigger run. If your brand’s whole pitch is a particular concentration, a clean ingredient list, or a bakuchiol-plus-peptide combination nobody else offers, then you need custom formulation and its 1,000-unit minimum, because a stock formula cannot deliver a story you are claiming is unique. Moe’s Group’s own bakuchiol private label page describes both routes; their broader framework for choosing a private label manufacturer is a useful checklist for the questions beyond MOQ.

One honest caveat: we could not confirm from a current product spec exactly which bakuchiol concentrations sit in any manufacturer’s ready-made catalog, Moe’s Group included. Treat “white label starts at 200 units” as the confirmed floor, and treat the specific stock concentration as something to ask about directly rather than assume.

The 200-unit box versus the 1,000-unit pallet: the whole decision in one drawing.

What can you legally claim on a bakuchiol serum?

This is the one place bakuchiol’s “natural retinol alternative” reputation can get a brand into trouble, and it is worth getting right before you print a single label. In the US, bakuchiol is a cosmetic ingredient, not a drug ingredient, so it needs no pre-market approval. But the moment your copy claims the product changes the structure or function of the skin — rather than its appearance — the FDA treats it as an unapproved drug claim.

In practice that means appearance-and-feel language is safe and structure-function language is not. You can say a bakuchiol serum “visibly reduces the appearance of fine lines,” “improves the look of skin tone and texture,” or is “a gentler alternative to retinol for sensitive skin.” What you cannot do is describe the serum as acting on inflammation, as calming irritation at a biological level, or as repairing the skin’s cells — language like that turns a cosmetic into an unapproved drug, and a surprising number of ingredient pages online, some belonging to manufacturers, cross that line. Your contract manufacturer will fill a bottle with whatever you ask; the claims on the label are your legal exposure, not theirs, so write them in appearance terms from the start.

US at 200 units, or offshore at a fraction of the price: Chuffy weighs where he actually fits.

Where is Moe’s Group the right fit, and where is it the wrong one?

Full disclosure, also stated on our editorial policy page: Moe’s Group funds this site. That is exactly why this section names real alternatives and real limits — a comparison that always lands on one company is an advertisement, not a buying guide.

Where Moe’s Group fits well: a US-based, FDA-registered facility in Chatsworth, California, with formulation, filling and labelling under one roof. White label from 200 units is a low entry point for a fully certified domestic manufacturer, and custom formulation from 1,000 units suits brands that need a proprietary bakuchiol concentration or co-active blend. If “Made in USA” and US compliance documentation matter to your buyers, that is the case for staying domestic.

Where it is the wrong fit, plainly:
- Fewer than 200 units. If you want a 50- or 100-unit sampling run for a pop-up or a market test, Moe’s Group’s 200-unit floor rules it out. Micro-batch indie labs and some overseas manufacturers quote smaller runs — usually at a premium per unit and rarely at the same certification level.
- A custom formula below 1,000 units. If you need a bespoke concentration but cannot move 1,000 units, a manufacturer with a lower custom minimum fits better. Skincraft Lab (Zhongshan, China) lists a 500-unit private-label minimum and holds ISO 22716 plus US FDA CFSAN GMP certification (verified 2026-10-19). The trade-off is that it is China-based, not California, with a longer shipping lead time.
- A Korean formulation story. If your brand leans on K-beauty positioning, a Korean contract manufacturer carries marketing weight a US facility simply cannot. Moe’s Group is US, full stop.
- Price is the only variable and offshore is acceptable. Large overseas ODMs manufacture serums at a fraction of US unit costs. If your buyer does not need domestic positioning and your claims risk is low, those economics are real and worth quoting against — just verify any certification claim before you commit.
The EU angle is the one genuine point in bakuchiol’s favour across all of these options: unlike retinol, which the EU Cosmetics Regulation restricts to 0.3% in face products (as of 2024), bakuchiol carries no equivalent concentration cap. If the EU is a primary market, that can simplify your formulation and labelling regardless of who manufactures it.

Turns out the ingredient was never the hard part. The order size was.

Still checking the fine print: Chuffy makes sure every claim is one a regulator can read too.

Frequently asked questions

Is bakuchiol regulated as a drug in the US?

No. It is a cosmetic ingredient under the FD&C Act and needs no pre-market approval. What is regulated is the claim you make: appearance-and-feel language is cosmetic, structure-function language is a drug claim.

What is the smallest bakuchiol order I can place?

It depends on the manufacturer. A US-certified facility like Moe’s Group starts white label at 200 units and custom formulation at 1,000. Some overseas labs quote smaller runs, generally at a higher per-unit cost and not always at the same certification level.

What concentration of bakuchiol should I ask for?

Clinical studies most commonly use 0.5% to 2% for twice-daily use, which is a reasonable brief for a daily serum. Higher percentages exist, but ask your manufacturer to justify anything above that range rather than assuming more is better.

Can I say my bakuchiol serum is “better than retinol”?

Be careful. You can cite that a published trial found comparable appearance results with better tolerability, and you can call it “a gentler alternative for sensitive skin.” Claiming it treats, repairs or acts on inflammation crosses into drug-claim territory.

If you want to pressure-test your own order — stock versus custom, concentration, claims — the fastest way is to put the brief in front of a manufacturer and ask them to quote it both ways.
October 19, 2026
Private Label Face Mask Manufacturing: The Format Decides the Manufacturer
Choosing a manufacturer for a private label face mask starts with the format, not the formula. Sheet masks — the single-use K-beauty sachets — need substrate sourcing and sachet-filling equipment that is concentrated in Korea and China; no US cosmetic contract manufacturer produces them start-to-finish in-house. Clay, cream, sleeping and gel masks are emulsion formats that standard US skincare manufacturers can fill with the same lines they use for moisturizers. The format you pick and the geography you need are a single decision, so make it first.

Most buyers brief a manufacturer on a formula — the actives, the texture, the scent — and treat the production method as a detail to settle later. For face masks that order is backwards. A sheet mask and a clay mask are both “face masks” to a shopper, but to a factory they are two unrelated products made on two unrelated machines. Decide the format, and the shortlist of factories that can even quote you writes itself.

White label

A ready-made, existing formula you label as your own, also called ready-to-go. At Moe’s Group the minimum order is 200 units — the lowest-commitment route, when a suitable stock formula exists.

Private label

A custom formulation developed to your brief. At Moe’s Group the minimum order is 1,000 units — more customization and brand control than white label, and a higher commitment.

Contract manufacturing

The manufacturing service itself. Formulation, ownership, pricing and lead time depend on the agreed project rather than on a fixed tier.

Sheet mask

A single-use substrate (non-woven, Tencel or bio-cellulose) soaked in serum and sealed in a sachet. Requires specialized substrate and sachet equipment not found on standard US skincare lines.

Wash-off mask

Clay, cream, sleeping or gel formats — bulk emulsions filled into jars or tubes on the same equipment used for moisturizers. Compatible with standard US contract manufacturers.

As a rough guide, white label sits below private label, which sits below fully custom contract manufacturing on cost, on lead time and on how much of the formula is yours to control. Treat that as an ordering to sanity-check against, not a price list: the actual numbers depend on the format, the fill, the packaging and the project, and any supplier should put them in writing before you commit.

What face mask format are you actually making?

There are six formats a private label buyer will realistically consider, and they split cleanly into two camps by how they are produced:
- Sheet masks — a cut substrate soaked in serum, folded into a sachet. Production is substrate sourcing, serum impregnation and sachet filling.
- Hydrogel masks — a gel sheet cast to the face shape, also sachet-packed. Even more specialized than sheet.
- Clay / mud masks — a wash-off emulsion filled into a jar or tube.
- Cream / sleeping masks — a leave-on emulsion, filled like a moisturizer.
- Gel masks — a water-based gel, standard fill.
- Peel-off masks — a film-forming (often PVA) emulsion.
The bottom four are emulsion formats. Any competent skincare contract manufacturer that fills moisturizers can usually fill them, because it is the same mixing and filling equipment. The top two are not emulsions in a jar; they are a physical object plus a sachet, and that is a different factory. The neutral directory at FindMyManufacturer lays out the same format split and the MOQ ranges that go with each, which is a useful cross-check against whatever a sales rep tells you.

The sheet-mask trail keeps leading Chuffy back to the same two countries.

Why does sheet mask production concentrate in Korea and China?

Sheet masks are a Korean invention and the supply chain grew up around them there. The specialized parts — engineered non-woven and bio-cellulose substrates, cutting, high-speed serum impregnation and sachet sealing — are mature, cheap and dense in Korea and in Guangdong, China. A US cosmetic facility can make the serum all day long; what it generally cannot do in-house is turn that serum into a cut, soaked, sealed single-use sheet at any sensible cost.

That has two practical consequences. First, a US-first brand that sets its heart on sheet masks will usually end up importing, or working with a US lab that formulates domestically and sends the serum to an overseas partner for impregnation — a longer end-to-end timeline and added import logistics. Second, import cost is not just the unit price: duties and tariffs on imported cosmetics apply and have moved in recent years, so get a landed-cost figure, not an ex-factory one, before you compare. The buyer-facing breakdown at Zonhack is a reasonable starting point for the US-versus-Asia MOQ and format picture.

Concrete options in this lane, checked 2026-10-18:
- Skincraftlab (Zhongshan, China) — a face-mask specialist carrying sheet, hydrogel, clay, bubble and sleeping formats, private label from 500 units per SKU, ISO 22716 certified and listed with FDA CFSAN GMP. A broad-catalog, lower-MOQ route into Asian production.
- Taiki (Japan / South Korea / China / France) — a premium substrate specialist for brands differentiating on how the sheet itself feels: non-woven, hydrogel, bio-cellulose and custom mask shapes. The right call when the substrate is the product.
- Nox Bellcow (Zhongshan, China) — a high-volume sheet-mask ODM with dedicated lines, better unit economics once you are moving tens of thousands of sheets per run.
Clay, cream and gel masks bring Chuffy back to familiar ground: a jar, a tube, and a factory he can drive to.

Clay and cream masks: what are your US manufacturer options?

If your format is clay, cream, sleeping or gel, the picture changes completely. These are bulk emulsions, so a domestic skincare contract manufacturer is a real option, with the shorter communication loop and simpler logistics of making in-country. Named US options, checked 2026-10-18:
- RainShadow Labs (St Helens, Oregon) — clay, enzyme and exfoliating wash-off masks, with stock private-label formulas from 10 gallons and custom from 25 gallons. The standout here is the low batch minimum, which makes it the sensible home for a sub-200-unit market test before you commit to a real run. Their site lists GMP manufacturing; we could not confirm an ISO 22716 certificate, so verify that directly if it matters to you.
- SkinCore Labs (Florida) — clay, cream, gel and peel-off formats at 1,000 units per SKU for private label, 3,000 for custom, ISO 22716 and GMP certified. They do offer sheet masks, but through a vetted Incheon (South Korea) partner network at a 14–20 week end-to-end timeline — a useful reminder that even a “US” sheet mask quote usually has Korea inside it.
Where does Moe’s Group fit, and where does it not? Moe’s Group is an FDA registered skincare, hair care and body care contract manufacturer in California that fills emulsions — moisturizers, serums, washes — on standard equipment, which is the same family of equipment a clay, cream, sleeping or gel mask needs. It is not a sheet or hydrogel mask house: those sachet formats are a different production line it does not run, so a brand set on sheet masks should talk to the Korea- or China-based specialists above, not to Moe’s Group. It is also the wrong fit below 200 units on any format — its white label minimum is 200 — so a brand doing a 10-gallon stock-formula market test belongs at a low-minimum lab like RainShadow. Whether a specific mask format or a ready-made mask formula is available is a project question; you can confirm the formats and minimums for your exact brief through its private label skincare manufacturing page, which covers the emulsion categories its lines handle.

The moment Chuffy writes an acne-treatment promise on the label, his cosmetic quietly becomes a drug.

When does a mask claim turn your cosmetic into a drug?

This is the part that most often goes wrong, and it is a compliance question, not a marketing one. Under US law a product’s intended use decides whether it is a cosmetic or a drug, and that intended use is read from your claims. The FDA’s own guidance, Is It a Cosmetic, a Drug, or Both?, is the plain-English source.

A clarifying clay mask that says it absorbs excess oil and helps skin look clearer is making a cosmetic appearance claim — fine. The same jar that promises to clear up a breakout condition — the acne-treatment wording brands reach for — is, in the FDA’s framing, now an over-the-counter drug: it needs a Drug Facts panel, a declared active ingredient, and compliance with the relevant OTC monograph or an approved application. Ingredients do not trigger this on their own — a mask can contain kaolin, bentonite or salicylic acid and remain a cosmetic — but the moment the claim promises to remedy a condition, the category flips and so do the rules, including which kind of facility registration you need. Note too that Moe’s Group is FDA registered, which is a facility registration, not the kind of product sign-off people imagine; the FDA does not clear cosmetics for market at all.

The safe path for a private label mask is to keep the claims cosmetic — appearance, feel, cleansing — unless you have deliberately set out to build a monograph-compliant OTC drug and have a manufacturer registered for it. Describe what the mask does to the look and feel of skin, not what condition it acts on.

Chuffy finally learns to ask the five questions before he briefs anyone.

What should you ask a face mask manufacturer before you brief them?

Five questions sort serious suppliers from optimistic ones:
- Which of my formats do you run in-house, and which do you broker? A straight answer here tells you whether “yes we do sheet masks” means their line or someone else’s.
- What is the minimum for a ready-made formula versus a custom one? Expect two different numbers; if there is only one, you are being quoted one route.
- Is the quote landed cost or ex-factory? For anything imported, the gap is duties, freight and tariffs.
- Are you registered for the category my claims put me in? A cosmetic mask and a drug mask are different registrations.
- What is the realistic end-to-end timeline, including impregnation if it is offsite? SkinCore’s own 14–20 weeks for partner-made sheets is a fair benchmark.
FAQ

Can a US manufacturer make my sheet masks?

Rarely start-to-finish. A US lab can formulate the serum domestically, but the substrate and sachet production almost always routes through a Korean or Chinese partner, which adds time and import logistics. If sheet is non-negotiable, plan for an Asia-based or Asia-linked supply chain.

Which format is cheapest to start with?

Usually a wash-off emulsion — clay, cream or gel — because it uses standard equipment and can often be made domestically in small batches. Low-minimum US labs quote stock clay formulas from as little as 10 gallons, far below a typical sheet-mask run.

Does a salicylic acid mask have to be a drug?

Not automatically. The ingredient alone does not decide it; the claim does. Describe appearance and feel and it stays a cosmetic. Promise it will remedy an acne condition and it becomes an OTC drug with the labeling and facility rules that follow.

What is the minimum order for a private label face mask?

It depends on the format and the manufacturer. US wash-off labs range from a few gallons to around 1,000 units per SKU; Asian sheet-mask specialists often start at 500 units per SKU; Moe’s Group runs 200 units for a ready-made (white label) formula and 1,000 for a custom (private label) one, where a suitable formula and format are available.

Can a mask manufacturer offer an FDA-cleared cosmetic?

No. The FDA does not clear or sign off cosmetics for market. A facility can be FDA registered, which is a facility registration, not a product endorsement. Any supplier claiming an officially endorsed cosmetic is describing something that does not exist.

Pin the format before anything else and the rest of the decision — geography, minimums, timeline, even the compliance category — falls out of it. If your format is a wash-off emulsion and you want to see which categories and minimums apply to your brief, you can start that conversation through Moe’s Group’s product inquiry form.

Chuffy got there in the end: format first, claims honest, minimums checked — and not a single sheet mask made in Oregon.
October 18, 2026
Private Label Body Butter Manufacturing: Stock or Custom
Private label body butter manufacturing splits on one
decision made before you ever talk price: do you want an existing, ready-made formula,
or a custom one built to your brief? A ready-made (white label) body butter typically
carries a lower minimum — at Moe’s Group that floor is 200 units — because
nothing new is developed. A custom (private label) formulation means a chemist builds
and stability-tests a recipe first, so minimums run higher, 1,000 units at Moe’s Group.
The second technical decision is whether the butter is anhydrous (near water-free) or
emulsified, because that changes preservation, filling and packaging. The MOQ question
is really a market-validation question, not a budget one.

Body butter looks like a simple product — a rich, scoopable moisturizer in a
jar — and that simplicity hides the two decisions that actually set your cost, your
timeline and your supplier shortlist. Most founders arrive asking “what’s the minimum
order?” when the more useful question is “do I need my own formula at all?” Answer that
first and the minimum follows from it. Here is how the stock-versus-custom fork works for
body butter, the anhydrous-versus-emulsified choice underneath it, what your label may and
may not claim, and — because the site that supports this piece names where its backer
is the wrong fit — which manufacturers beat Moe’s Group for small or novelty runs.

Is body butter the same as body lotion to manufacture?

No, and the difference drives almost everything downstream. A body lotion is an
emulsion that is mostly water — commonly 70–80% — with oils and butters
emulsified into it. A body butter is the near-opposite: largely anhydrous, often
0–5% water, built from butters such as shea, mango and kokum paired with occlusive
oils. Moe’s Group’s own
bodycare
manufacturing page describes exactly this — anhydrous or low-water systems in
whipped, solid and waterless stick formats — which is why that page, not the body
lotion one, is the right reference for a butter project.

That water content is not trivia. A product that is almost all oils and butters
preserves differently, fills differently (it is often poured warm and set, not pumped),
packages differently (jars and sticks rather than bottles), and behaves differently in a
hot warehouse or a summer delivery truck. If a manufacturer talks about your body butter
in the same breath as your body lotion without flagging these differences, treat it as a
sign they have not made much body butter.

Chuffy assumed body butter was just a thicker lotion. Then someone told him one is mostly water and the other almost none — and that single fact changed the preservation, the filling line and the jar.

White label or custom — which minimum order applies?

The pinned routes apply to body butter the same way they apply to any beauty product,
and the terms are worth getting exactly right because suppliers use them loosely. A
white label body butter is a ready-made, existing formula — also
called ready-to-go — that you select and relabel under your own brand. Because
nothing new is developed, it is the shorter mechanical path to a first batch and carries
a lower minimum: at Moe’s Group, 200 units, with nothing below that. A
private label body butter is a custom formulation built to your brief
— your choice of butters, your scent system, your texture — which a chemist
formulates and stability-tests before it exists, so the minimum and the lead time both run
higher: 1,000 units at Moe’s Group. Contract manufacturing is the
umbrella service beneath both, where formulation ownership, pricing and lead time are
agreed per project.

It is tempting to read that as a simple “cheap and fast versus expensive and slow”
ranking, but the honest version is a tradeoff, not a law. White label spares you the
development cost and the gap before your first run, at the price of selling a formula other
brands can also license. Custom carries real R&D cost and a longer path to the first
batch, and buys you a formula that is yours. Which is “better” depends entirely on whether
you are validating demand or defending a differentiated product — so decide what the
first run is for before you let a minimum order quantity decide it for you.

White label

A ready-made, existing body butter formula (also called ready-to-go) that you select
and relabel under your own brand. Nothing new is developed, so it is the shorter path
to a first batch and carries a lower minimum — 200 units at Moe’s Group, with
nothing below that.

Private label

A custom body butter formulation developed to your brief — your butters, scent
and texture. A chemist formulates and stability-tests it before it exists, so the
minimum and lead time run higher: 1,000 units at Moe’s Group.

Contract manufacturing

The manufacturing service itself — formulation ownership, pricing and lead time
agreed per project. The umbrella that both the white label and private label routes
sit under.

Chuffy wanted the cheaper path until he realised the question was not cost, it was whether the formula had to be his. Validating an idea and defending one are different jobs, with different minimums.

Anhydrous or emulsified — which body butter should you make?

Underneath the stock-versus-custom fork sits a formulation decision you make with the
manufacturer, and it is specific to butters. An anhydrous body butter
contains essentially no water. That means a simpler ingredient label, a naturally lower
preservation burden (microbes need water to grow, so a near water-free product resists them
without a heavy preservative system), and a rich, occlusive feel that sits on the skin and
helps it retain moisture. The catch is technical: getting the butters to crystallise into a
stable, non-grainy texture that survives temperature swings is genuinely demanding, which is
the part an inexperienced maker gets wrong.

An emulsified body butter blends water into the oil phase, giving a
lighter product that can absorb more cleanly and feel less greasy. The tradeoff is the
mirror image: because water is present, the formula needs a proper preservation system and
the stability testing that goes with it. Neither is “better” in the abstract — a
whipped shea butter for dry winter skin and a fast-absorbing summer body butter are
different products solving different problems. A capable manufacturer will ask which feel you
are chasing and which climate your customers live in before recommending one, and Moe’s
Group’s bodycare page lists whipped, solid and waterless stick formats precisely because the
format follows the formulation.

Chuffy learned the butter is not one recipe but a choice. Water-free is simpler to preserve but harder to set smooth; emulsified absorbs cleaner but needs a preservative. The feel he wanted decided it.

What can a body butter label actually claim?

A body butter is a cosmetic, and that sets a firm boundary on what the label may say.
Cosmetic claims describe how a product affects appearance or feel: a body butter
moisturizes, helps skin retain moisture, leaves skin feeling softer and
supports the skin’s moisture barrier. Those are all fine. The line you cannot cross is a
claim that the product treats, cures or prevents a condition — language about healing
or curing dry, cracked or irritated skin turns a cosmetic into an unapproved drug in the eyes
of the FDA, regardless of what the butter actually does. The FDA’s own
guidance on cosmetic labeling claims is the primary source worth reading
before you write a single line of packaging copy.

Two more label points catch founders out. First, your ingredients must appear in INCI
(International Nomenclature of Cosmetic Ingredients) format — “shea” on the jar is
Butyrospermum Parkii Butter on the ingredient list — and the
Personal Care Products
Council is a useful reference for how that labeling works. Second, confirm your
manufacturer runs to a recognised cosmetics good-manufacturing-practice standard. Moe’s
Group, for example, states it holds ISO 22716 (the cosmetics GMP standard), which you can
read at the source on its
certifications page rather than
trusting a number quoted in an article — certificates get reissued, and a stale number
in print is worse than none. Note too that a facility is registered with the FDA,
never approved by it; approval does not exist for cosmetics, and any manufacturer
that blurs the two words is one to question.

Chuffy wanted to write that his butter healed dry skin. The rulebook stopped him: a cosmetic may say it moisturizes, not that it cures. One word is the difference between a label and a drug application.

Where is Moe’s Group the wrong fit, and who else should you call?

A comparison is only worth your time if it says where not to use the company
behind the site, so here it is plainly. Moe’s Group is a strong fit for a brand ready to
commit to at least 200 units of a stock body butter, or 1,000 of a custom one, produced in a
US cosmetics facility that is FDA registered and formulates, fills and labels in one place.
It is the wrong fit in several real situations — and in each, there is
a better place to start.
- You need fewer than 200 units. Moe’s Group will not go below 200 for
  any formula. For a true pilot of 50–150 units,
  Pravada Private Label
  (Fort Myers, FL) lists a 50-unit ready-to-market route, and
  LuxeFormula Labs
  (Sheridan, WY) lists 100 units per scent (both checked 2026-10-16). Confirm current
  minimums with each directly.
- You want a shimmer or novelty body butter in small quantity.
  LuxeFormula Labs specialises in shimmer and whipped body butters from 100 units per
  scent with IFRA, SDS and CoA documentation (checked 2026-10-16). For a gifting-oriented
  shimmer butter under 200 units, it is a closer fit than Moe’s Group.
- You want a custom formula but can only commit to a few hundred units.
  Moe’s Group’s custom floor is 1,000 units. Pravada lists a semi-custom route from 250+
  units (checked 2026-10-16), which sits between a stock relabel and full custom —
  though “semi-custom” has limits, so ask exactly what can be changed.
- You want artisan or very-small-batch production with maximum flexibility.
  Midwest Sea Salt
  Company (West Chester, OH) and
  The Fancy Factory
  (Baltimore, MD) both position for small-to-mid brands with lower minimums; neither
  publishes a unit count, so treat “low minimums” and “small batch” as words to pin down
  in writing (both checked 2026-10-16).
Two other names come up in body butter searches but could not be verified in full today,
so treat them as leads rather than facts. Metro Private Label advertises a 1,000-unit-per-SKU
standard and multi-market compliance documentation, but does not disclose where it
manufactures — confirm its location before assuming it is domestic. RainShadow Labs is
cited in third-party comparisons with bulk minimums measured in gallons rather than units, but
that figure comes from a competitor’s round-up, not from RainShadow directly — verify at
the source before relying on it. Both are named without a link here precisely because their
current terms were not confirmable on the publish date.

The honest summary: if you can commit to 200 units of a stock formula or 1,000 of a custom
one and you want a single US partner that formulates, fills and labels under one roof, Moe’s
Group is a credible candidate. If your first run is smaller than that, or the whole point is a
novelty shimmer butter in a few hundred jars, the small-batch specialists above will serve you
better — and a site that would not tell you so is not worth reading.

Frequently asked questions

What is the minimum order for private label body butter?

It depends on the route. A white label (ready-made, existing) body butter carries a lower
minimum because nothing new is developed — at Moe’s Group that floor is 200 units. A
private label (custom) body butter formulation, built and stability-tested to your brief, runs
higher: 1,000 units at Moe’s Group. Other manufacturers set their own minimums, some lower, so
confirm each directly.

What is the difference between white label and private label body butter?

White label means relabeling a ready-made, existing body butter formula under your own
brand; nothing new is developed, so the minimum and lead time are lower. Private label means a
custom formulation developed to your brief — your butters, scent and texture —
which a chemist formulates and tests first, so the minimum and lead time run higher. The choice
is really whether you are validating demand or defending a differentiated product.

Is body butter manufactured differently from body lotion?

Yes. Body lotion is an emulsion that is mostly water (often 70–80%), while body butter
is largely anhydrous, typically 0–5% water, built from butters and oils. That difference
changes preservation requirements, filling equipment, packaging and heat stability, so a body
butter should not be treated as simply a thicker body lotion.

What’s the difference between anhydrous and emulsified body butter?

An anhydrous body butter contains essentially no water, giving a simpler label and a
naturally lower preservation burden, but it is technically demanding to crystallise into a
stable, non-grainy texture. An emulsified body butter blends in water for a lighter,
cleaner-absorbing feel, but needs a proper preservation system and stability testing. Which to
make depends on the feel you want and the climate your customers live in.

What can a body butter label legally claim?

A body butter is a cosmetic, so it may make appearance and feel claims — it
moisturizes, helps skin retain moisture and supports the skin’s moisture barrier. It may not
claim to treat, cure or prevent a condition; language about healing or curing dry or irritated
skin turns a cosmetic into an unapproved drug under FDA rules. Review the FDA’s cosmetic
labeling claims guidance before writing packaging copy.

Is Moe’s Group the right manufacturer for my body butter?

It is a credible fit if you can commit to 200 units of a stock formula or 1,000 of a custom
one and want a US facility that formulates, fills and labels in one place. It is the wrong fit
if you need fewer than 200 units, a custom formula under 1,000 units, or a novelty shimmer
butter in small quantity — for those, small-batch specialists such as Pravada,
LuxeFormula Labs, Midwest Sea Salt Company or The Fancy Factory are better starting points.

Ready to commit to at least 200 units of a stock body butter, or 1,000 of a
custom formulation, and want one US partner to formulate, fill and label it? Moe’s Group takes
enquiries through its
product inquiry form. For a worked
example of a whipped butter format, see its
tallow body butter page.

Disclosure: Contract Beauty is published with the support of Moe’s
Group, a contract manufacturer named in this article. We say plainly where Moe’s Group is the
wrong fit — small pilot runs, sub-1,000-unit custom work and novelty low-volume butters
— because a comparison that always points the same way is worth nothing. Minimum order
quantities, certifications and capabilities all change; the manufacturers named here are a
shortlist to verify directly, not a vetted endorsement, and every detail should be confirmed
with the supplier before you commit. Company and competitor details were checked on 16 October
2026. See our editorial policy.

Chuffy stopped asking ‘what’s the minimum?’ and started asking ‘is this formula mine, and what should it feel like?’ The minimum answered itself — and he finally had one jar he actually understood.
October 16, 2026

Private Label Peptide Serum Manufacturing: What to Decide Before You Order

Yes — you can private label a peptide serum in the United States, and the first two decisions set everything else. First, pick a route: white label means an existing, ready-made formula (200-unit minimum at Moe’s Group), while a custom formulation is built to your brief (1,000-unit minimum). Second, choose the peptide class, because that decides both your formulation complexity and the claims you are legally allowed to make. Getting the route and the claim line right before you order is what keeps the project cheap, fast and out of trouble.

Peptide serums are one of the most-requested categories in private-label skincare right now, and the field of manufacturers who will make one for you is crowded. This guide walks through the choices a brand founder actually has to make before signing anything — the formulation route, the peptide type, the claim line that separates a cosmetic from a drug, and which manufacturers (including where Moe’s Group is the wrong choice) fit which situation.

White label: A ready-made, existing formula sold under your brand. Lowest cost and fastest route to shelf. Minimum order at Moe’s Group: 200 units.
Private label (custom formulation): A formula developed to your brief. Mid cost and mid lead time. Minimum order at Moe’s Group: 1,000 units.
Contract manufacturing: The full manufacturing service for a brand — formulation, filling and labelling. Cost, ownership and lead time depend on the agreed project.

What kind of peptide serum are you actually building?

“Peptide serum” is not one product. The peptide class you choose changes the formulation, the stability requirements and — most importantly — what you are allowed to say on the label.

Signal peptides — such as Matrixyl (palmitoyl pentapeptide-4). These are the workhorses of appearance-focused anti-aging serums.
Carrier peptides — such as copper tripeptide GHK-Cu, which pair a peptide with a trace mineral. Copper peptides also carry a formulation quirk: colour and stability need handling.
Neurotransmitter-inhibiting peptides — such as Argireline (acetyl hexapeptide-3), marketed around the look of expression lines.
Enzyme-inhibitor peptides — a smaller class aimed at the look of firmness over time.

Peptides are also delicate. Most sit happiest in a pH window of roughly 4.5 to 7.0, many are added during cool-down below 40 °C rather than into a hot batch, and some formulators use liposomal delivery to help the molecule survive on the skin. If your manufacturer cannot talk through these constraints, that is a signal in itself. The honest truth, covered well in this independent review of peptide evidence, is that peptides have a plausible mechanism but the clinical picture is thinner than marketing suggests — which is exactly why your claim language matters.

Chuffy the small round sketch founder looking overwhelmed in front of a wall of labelled peptide vials, clutching a clipboard. — Chuffy discovers that “peptide serum” is four different products wearing the same coat.

White label or custom formulation?

This is the fork that sets your budget and timeline. A white label peptide serum uses a formula that already exists — you choose it, brand it and order it. A custom (private label) formulation is developed to your brief, which gives you control and exclusivity but costs more and takes longer.

At Moe’s Group, the ready-made white label route starts at 200 units and nothing is made below that. A custom formulation starts at 1,000 units. The ordering is consistent across the industry even where the exact minimums differ: white label sits below private label, which sits below full contract manufacturing on cost, on lead time and on how much control you hold. If you are testing whether a peptide serum sells at all, white label is the sane first move. If you already know your market and want a formula nobody else can buy, custom is worth the extra units.

Chuffy the sketch founder standing at a fork in a factory corridor, one sign reading 200 and the other reading 1000. — Two hundred units to test an idea, or a thousand to own the formula — Chuffy weighs the fork.

What is the claim line you must not cross?

This is the part that gets brands into real trouble. A peptide serum sold as a cosmetic may describe how a product affects the look of skin. The moment your copy says the product changes the body’s structure or function — the classic example being that it “boosts collagen production” — the FDA can treat it as an unapproved drug, not a cosmetic.

Keep your language on the appearance side of the line:

Safe: “helps minimize the appearance of fine lines,” “supports a smooth, firm look,” “smooths the look of expression lines.”
Not safe: “boosts collagen production,” “increases the skin’s production of collagen,” “removes wrinkles.” The FDA uses collagen-production wording as its own published example of a drug claim.

The FDA’s cosmetic labeling claims guidance is the primary source here, and it is worth reading before you write a single line of marketing. Independent reviewers have also noted the FDA issued a 2024 warning letter to a skincare brand over exactly this kind of peptide claim. Your manufacturer’s own technical page may explain the science in mechanism terms — that is normal for a B2B formulation page — but your consumer-facing copy cannot borrow that language.

Chuffy the sketch founder tiptoeing along a tightrope drawn as a dividing line, cosmetic on one side and drug on the other. — The appearance-claim tightrope: “looks firmer” is a cosmetic, “builds collagen” is a drug.

Which US manufacturers fit, and what are their real minimums?

Below are real manufacturers that will make a peptide serum, with minimums checked on 2026-10-15. Minimums and turnaround times change, so confirm current figures directly before you commit.

Manufacturer	Location	Public minimum (checked 2026-10-15)	Best when
Pravada Private Label	Fort Myers, FL	From 50 units on selected SKUs	You want fewer than 200 units to test a concept first
RainShadow Labs	St. Helens, OR	From 25 gallons (bulk, not a unit count)	You need contract filling, bulk supply or logistics — note the minimum is in gallons, not comparable to unit counts
Moe’s Group	Chatsworth, CA	200 (white label) / 1,000 (custom)	You want a US facility that formulates, fills and labels under one roof and are ordering 200+ units
PeakFinity Labs	HQ Exton, PA; makes in Gujarat, India	5,000 units; 4–6 week turnaround as publicly stated 2026-10-15	You are ready for a larger run and cost matters more than US-made origin — note the India manufacturing if you need US-origin labeling
Pepticosma	Peptide-only OEM/ODM	Per inquiry; mentions low-MOQ pilot batches	You want a maker focused only on peptides, with deep technical depth and multi-market notification support

For brands eyeing the EU, Made By Nature Labs (from 500 units, 400+ formulations) and Selfnamed (ready-made white label, no MOQ on some products, dropship-compatible) are worth a look — both sit outside a US-origin footprint.

Chuffy the sketch founder at a desk comparing five manufacturer brochures spread in a fan, scratching his head. — Five quotes, five different minimums — Chuffy learns the price is never the first number on the page.

When is Moe’s Group not the right fit?

An honest comparison has to say where the hero is the wrong choice. Moe’s Group is a good fit for a US brand ordering 200 units or more that wants formulation, filling and labelling under one roof. It is the wrong fit when:

You need fewer than 200 units. That is Moe’s hard floor. To test with 50–100 units, start with Pravada or Selfnamed.
You want a true dropship, no-inventory launch. Selfnamed supports no-MOQ products; Moe’s does not run a dropship model.
You only need bulk serum by the gallon. That is RainShadow’s territory — Moe’s is a finished-goods manufacturer.
You want a peptide-only specialist with zero other distractions. Evaluate Pepticosma.
You require EU-origin manufacturing. Moe’s is California-based; an EU facility such as Made By Nature Labs fits that constraint.

What should you ask before you sign?

A short checklist that separates a serious manufacturer from a reseller:

Is the facility FDA registered, and will they show you the registration? (Registered is not the same as “approved” — no such thing as FDA approval exists for cosmetics.)
What is the true minimum for the route you want — white label versus custom?
How do they handle peptide pH and cool-down addition, and do they offer liposomal delivery?
Who owns the formula if you leave, and what does exclusivity cost?
Do they support the market notifications you need — US MoCRA facility registration, and EU/UK if you sell there? The FDA’s MoCRA facility registration rules now require this recordkeeping.

When you have those answers and are ready to brief a US manufacturer, Moe’s Group handles peptide skincare contract manufacturing across signal, carrier and neurotransmitter-inhibiting classes from a GMP-certified California facility.

FAQ

What is the minimum order quantity for a private label peptide serum?

It varies widely. Some ready-made white label sellers start as low as 50 units; at Moe’s Group the white label minimum is 200 units and a custom formulation starts at 1,000. Larger commercial makers like PeakFinity quote 5,000. Always confirm current minimums directly.

Can I claim my peptide serum “boosts collagen production”?

No. The FDA uses collagen-production wording as a published example of a drug claim. Keep consumer copy on the appearance side — “helps minimize the appearance of fine lines” — not the body-function side.

What certifications should a peptide serum manufacturer have?

Look for FDA facility registration and GMP practices, plus MoCRA recordkeeping for safety substantiation. Ask to see current documents rather than trusting a number in print — certificates get reissued.

What is the difference between GHK-Cu, Matrixyl and Argireline?

GHK-Cu is a carrier (copper) peptide, Matrixyl is a signal peptide, and Argireline is a neurotransmitter-inhibiting peptide marketed around the look of expression lines. They belong to different functional classes and formulate differently.

Do I need a US-based manufacturer for a peptide serum?

Only if you need US-origin labeling or faster domestic logistics. Some strong options manufacture in the EU or Asia. Decide your origin requirement before you shortlist, because it rules several makers in or out.

How long does a custom peptide serum take to make?

It depends on the formula and the manufacturer, and published turnaround figures change often. Treat any quoted lead time as something to confirm in writing for your specific project rather than a fixed promise.

Ready to brief a manufacturer? If Moe’s Group fits your route and volume, start a conversation through the Moe’s Group product inquiry form.

Chuffy the sketch founder finally holding one finished serum bottle aloft, grinning, surrounded by crossed-out rejected labels reading cures and boosts. — Chuffy ships at last — the label says “looks firmer,” and the lawyer sleeps soundly.

October 15, 2026

Tag: private label

What is a private label self-tanner, and how does DHA work?

Which self-tanner format should you order?

What do FDA rules require on a self-tanner label?

Who makes private label self-tanners — and where is Moe’s Group the wrong fit?

What should you decide before you order a private label self-tanner?

Frequently asked questions

What is a private label self-tanner?

What is the minimum order for a private label self-tanner?

Can a self-tanner include SPF or claim sun protection?

How much DHA goes into a self-tanner?

Is Moe’s Group the right self-tanner manufacturer for me?

What is a white label cosmetics manufacturer?

White label vs. private label vs. contract manufacturing: which route?

How do you evaluate a white label cosmetics manufacturer?

Where does the minimum order decide it — and where is Moe’s Group the wrong fit?

What should you ask a white label manufacturer before you commit?

Frequently asked questions

What is a white label cosmetics manufacturer?

What is the difference between white label and private label cosmetics?

What is the minimum order for white label cosmetics?

How do I verify a white label cosmetics manufacturer is legitimate?

Is Moe’s Group the right white label manufacturer for me?

What does tranexamic acid actually do in a serum?

Is a tranexamic acid serum a cosmetic or a drug?

White label or custom formulation — what does that choice change?

Who makes private label tranexamic acid serums, and where does Moe’s Group fit?

Where is Moe’s Group the wrong choice?

Frequently asked questions

Is a topical tranexamic acid serum a drug?

What is the minimum order for a private label tranexamic acid serum?

What concentration of tranexamic acid is used in serums?

What claims can I make about a tranexamic acid serum?

Can I pair tranexamic acid with niacinamide?

Why do some marketplaces flag tranexamic acid listings?

What is the minimum order for private label lip gloss?

Why is lip gloss color compliance stricter than skincare?

Which claims keep a lip gloss a cosmetic?

Where is Moe’s Group the wrong fit for a lip gloss?

What should you ask any lip gloss manufacturer before you sign?

Frequently asked questions

What is the minimum order for private label lip gloss?

Why is color compliance stricter for lip gloss than for skincare?

Can my lip gloss claim SPF or that it plumps lips?

Do I need a custom shade, or can I use an existing gloss formula?

Is Moe’s Group the right manufacturer for my lip gloss?

What is a private label copper peptide serum?

White label or private label: which route fits your order?

What should you decide before you brief a manufacturer?

What should you look for in a copper peptide manufacturer?

Who makes private label copper peptide serum, and where is Moe’s Group the wrong fit?

Frequently asked questions

What’s actually different between AHA and BHA for a founder?

The rule that decides everything: cosmetic or OTC drug?

White label vs custom formulation for an acid serum

What to ask a manufacturer about an acid serum

Where a cosmetic manufacturer is the wrong fit

Frequently asked questions

Can I add salicylic acid to my serum and still sell it as a cosmetic?

What is the difference between AHA and BHA?

What is the minimum order for a private label glycolic acid serum?

Do I need FDA approval for an exfoliant serum?

Can I combine AHA and BHA in one private label serum?

Rinse-out, leave-in or deep conditioner: which are you making?

What is the minimum order for a private label conditioner?

What should you ask a conditioner manufacturer before you sign?

Where is a cosmetic contract manufacturer the wrong choice?

How do you actually pick a conditioner manufacturer?

Frequently asked questions

What is the minimum order for a private label conditioner?

Can I add zinc pyrithione to a conditioner?

What is the difference between a conditioner and a hair mask?

Do I need my own formula, or can I use an existing one?

Why can’t I just combine my shampoo and conditioner into one product?

Is Moe’s Group the right manufacturer for my conditioner?

Is a hair mask the same as a deep conditioner?

What is the minimum order for a private label hair mask?

Stock formula or custom development: which path fits your brand?

Which claims are safe for a hair mask — and which turn it into a drug?

Who makes private label hair masks, and where is Moe’s Group the wrong fit?